478189
47
Zoom out
Zoom in
Previous page
1/52
Next page
Maintenance
Troubleshooting
In this troubleshooting guide you will À nd solutions to the problems you may have with your machine.
For further information please contact your local authorized PFAFF® dealer who will be happy to help
you.
Problem/cause Remedy
General problems
Thread snips do not cut the thread? (4.0) Remove stitch plate and clean lint from bobbin area.
Enable automatic thread snips in the settings menu.
Fabric does not move? Make sure that machine is not set in free-motion mode
in the settings menu.
Make sure that the feed dogs are not lowered.
Wrong stitch , irregular or narrow stitch?
(4.0 and 3.0)
Deactivate twin needle or stitch width safety in the
settings menu.
The needle breaks? Insert needle correctly as described in chapter 2.
Attach correct needle for the fabric.
The machine will not sew? Check that all plugs are securely plugged into the
machine and into the wall socket.
Check that the foot control cord is securely plugged
into the foot control.
Push bobbin winder lever to sewing position.
The sewing machine function buttons do not
respond to touch?
The sockets and function buttons on the machine can
be sensitive to static electricity. If the buttons do not
respond to touch, turn the machine OFF and then
ON again. If the problem persists, contact your local
authorized PFAFF® dealer.
The machine skips stitches
Did you insert the needle properly? Insert needle correctly as described in chapter 2.
Did you insert a wrong needle? Use needle system 130/750 H.
Is the needle bent or blunt? Insert a new needle.
Did you thread the machine properly? Check how the machine is threaded.
Is the correct presser foot used? Attach correct presser foot.
Is the needle too small for the thread? Make sure the needle is correct for the thread and
fabric.
Is the fabric moving up and down with the
needle when free-motion sewing? (Sensormatic
free-motion mode, 4.0)
Reduce the presser foot pivot height in the settings
menu.
Needle thread breaks
Did you insert the needle properly? Insert needle correctly as described in chapter 2.
Did you insert a wrong needle? Use needle system 130/750 H.
Is the needle bent or blunt? Insert a new needle.
Did you thread the machine properly? Check how the machine is threaded.
Is the needle too small for the thread? Change the needle to the proper size for the thread.
Are you using poor thread with slubs or thread
which has become dry?
Change to a new higher quality thread purchased
from an authorized PFAFF® dealer.
5:3
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Expression 3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Expression 3.0 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Expression 3.0

Pfaff Expression 3.0 User Manual - German - 52 pages

Pfaff Expression 3.0 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info