478189
37
Zoom out
Zoom in
Previous page
1/52
Next page
A
B
C
Sewing
Free-motion position (3.0 and 2.0)
When using the free-motion/darning foot, the presser
foot needs to be in the free-motion position.
1. Disengage the IDT and lower the feed dogs.
2. Attach the free-motion/darning foot and select a
stitch.
3. To engage the free-motion position, move the
presser foot lift up and push the switch (A), on the
underside of the lift, towards you until it snaps
into place. Release the lift and it will be set in the
free-motion position.
4. Test sew on a scrap piece of the fabric with the
batting or stabilizer you will use. If necessary,
increase thread tension for your desired result.
5. Start to sew.
6. To disengage the position, push the lift slightly
upwards and the switch (A) away from you until
it snaps into place.
For 4.0: See page 2:17 for instructions on how to free-
motion sew with the 4.0.
Buttonholes
To sew a buttonhole, À rst attach the correct foot, then
select your buttonhole. Make sure that the IDT is
disengaged. To ensure good results, start by sewing
a test sample on a scrap piece of the fabric with the
stabilizer you will use.
The direction of the stitches being sewn will be
indicated on the screen by an arrow next to the
buttonhole.
Sensormatic buttonhole
When you sew a buttonhole with the sensormatic
buttonhole foot, adjust the slit length so that
it is slightly larger than the size of the button.
1. Snap on the sensormatic buttonhole foot 5A.
2. Plug the cord into the socket (B) found to the left
underside behind the light bulb.
3. Use the ruler on the lid to measure your button.
Set the slit length using the left and right arrow
buttons on the wheel.
4. Make sure that the red arrow lines up with the
marking on the foot (C).
5. Start sewing by pressing the foot control.
6. The arrows on the graphic display will show
when each part of the buttonhole is sewn and in
which direction. The columns will be sewn in the
same direction.
7. The buttonhole will be completed automatically.
You can repeat the buttonhole as many times as
you wish by pressing the foot control.
3:7
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Expression 3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Expression 3.0 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Expression 3.0

Pfaff Expression 3.0 User Manual - German - 52 pages

Pfaff Expression 3.0 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info