478189
26
Zoom out
Zoom in
Previous page
1/52
Next page
1
2
3
4
i
1
378 109 11 12 13
14 15 16 17
2
4
5
6
Preparations
Buttons for expression™ 2.0
Thread tension dial (1)
If needed, adjust the top thread tension using the
markings on the tension dial.
Needle up/down with indicator (2)
Press this button to move the needle up or down.
The set ting of the needle stop po si tion is changed
at the same time. When needle down is activated,
the indicator is lit, the needle will stop in the down
position.
You can also tap the foot control to raise or lower
the needle.
Speed control (3)
Press the speed button to reduce the sewing
speed by half. An icon on the graphic display will
indicate that your machine is set to half speed.
Press the speed button again to resume full speed.
Reverse (6) with indicator (4)
For permanent reverse, press the button
before starting to sew. The reverse indicator (4)
will be lit and the machine sews in reverse until
you press the button again to cancel.
If you press the reverse button while sewing, the
machine sews in reverse for as long as you keep the
button pressed. The reverse indicator is lit when
the reverse button is pressed.
Reverse is also used when sewing buttonholes,
programmed tie-off end and darning stitches to
step between the parts of the stitch.
Programmed tie-off indicator (5)
The programmed tie-off indicator is lit to indicate
that one or several tie-off options are activated. The
indicator stays lit until the tie-off options are no
longer in use.
Immediate tie-off (7)
Press the tie-off button while sewing and your
machine sews a few tie-off stitches and stops
automatically.
Graphic display (8)
The graphic display lets you view all your
selections and options. Stitches are shown in real
size.
Stitch width or stitch positioning (9)
Increase or decrease the stitch width using the +
and - buttons.
Press the alternatives button (11) to view the stitch
positioning for the selected stitch. Use the + and -
buttons to change the stitch position.
Stitch length or stitch density (10)
Increase or decrease the stitch length using the +
and - buttons.
Press the alternatives button (11) to view the
density setting for satin stitches. Use the + and
- buttons to change the density for the selected
stitch.
2:14
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Expression 3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Expression 3.0 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Expression 3.0

Pfaff Expression 3.0 User Manual - German - 52 pages

Pfaff Expression 3.0 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info