478189
23
Zoom out
Zoom in
Previous page
1/52
Next page
Preparations
Presser foot up and extra lift toggle (9)
Raises the presser foot and needle to the up
position. Press the button once more and the
presser foot will raise to extra lift.
Presser foot down and pivot toggle (10)
Lower the presser foot completely. Press the button
once more to raise the presser foot to pivot height.
The presser foot is lowered automatically when
you start sewing.
Graphic display (11)
The graphic display lets you view all your
selections and options. Stitches are shown in real
size.
Stitch width or stitch positioning (12)
Increase or decrease the stitch width using the +
and - buttons.
Press the alternatives button (14) to view the stitch
positioning for the selected stitch. Use the + and -
buttons to change the stitch position.
Stitch length or stitch density (13)
Increase or decrease the stitch length using the +
and - buttons.
Press the alternatives button (14) to view the
density setting for satin stitches. Use the + and
- buttons to change the density for the selected
stitch.
Alternatives (14)
When you select a decorative stitch, the width
and length settings will be shown on the graphic
display. By pressing the alternatives button, the
stitch positioning will be shown instead of the
stitch width setting and the density will be shown
instead of the length setting.
Wheel (15)
Use these buttons to move around the graphic
display. The wheel has up and down arrow
buttons, left and right arrow buttons and the wheel
center icon is a checkmark for OK.
The wheel has several functions, for example
stepping between stitches, setting the size of a
buttonhole and moving between options in the
settings menu.
Direct selection (16)
By pressing one of, or a combination of, the 0 to 9
buttons, you select the stitch represented by that
number immediately.
F1 - Function 1 (17)
The F1 button is used to set the tapering program.
It is also used to repeat buttonholes and to
deactivate repeat for darning stitches. All selections
will be shown on the graphic display.
In sequencing the F1 button is used to select a
character set.
F2 - Function 2 (18)
The F2 button is used to set the tie-off and thread
snips options and in sequencing it is used to select
font. All selections will be shown on the graphic
display.
Info button (19)
Press this button to toggle the recommendations
view on and off.
Settings menu (20)
Press this button to open the menu for machine
settings.
Mirror end to end (21)
For mirroring stitches and sequences end to end.
Mirror side to side (22)
For mirroring stitches and sequences side to side.
Load personal stitch or sequence (23)
Press this button to load a personal stitch or
sequence.
Save personal stitch or sequence (24)
Press this button to save a stitch or sequence to the
machine’s memory.
Clear (25)
For deleting single stitches in a sequence, or
personal stitches and sequences.
Sequencing (26)
Press this button to enter sequencing.
2:11
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Expression 3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Expression 3.0 in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Expression 3.0

Pfaff Expression 3.0 User Manual - German - 52 pages

Pfaff Expression 3.0 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info