478178
29
Zoom out
Zoom in
Previous page
1/36
Next page
Sewing - 29
3 mm
(1/8")
12 mm
(1/2")
6 mm
(1/4")
To make piping from your fabric:
1. Cut bias or crosswise grain strips, wide enough
to cover the cording plus seam allowances.
2. Lay the cording on the wrong side of the fabric
strip and wrap the fabric over the cord.
3. Place the fabric and cord under the Piping Foot
with the cord in the groove on the underside of
the foot.
4. Stitch. The groove will guide the cord so the
fabric covers evenly.
TIP: When you sew this piping into a garment, adjust
the needle position so it stitches one setting closer to the
cord to cover the À rst stitching.
Decorative trim foot
Embellish your project with different types of trims
by using the Decorative trim foot. This foot will
easily guide the trims through the opening at the
front and through the groove under the presser
foot.
1. Thread your machine with a regular sewing
thread or decorative thread on top and regular
sewing thread in the bobbin.
2. Select a straight stitch, zigzag stitch or
decorative stitch. Avoid using stitches with too
much back and forth motion.
Tip: For the 6mm wide trims, you can also use a 6mm
twin needle. Select a straight stitch and it will sew at the
edges of the trim.
3. Place the trim in the presser foot as the picture
shows.
4. Snap on the Decorative Trim Foot.
5. Engage the IDT™ system.
6. Sew carefully, not too fast. (You might need
stabilizer underneath the fabric)
7. The best result is achieved if you use Á at trims,
such as silk, velvet, satin or cotton ribbons.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Expression 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Expression 150 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Expression 150

Pfaff Expression 150 User Manual - German - 36 pages

Pfaff Expression 150 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info