Preparations - 19
Alternatives (11)
When you select a decorative stitch, the width
and length settings will be shown on the graphic
display. By pressing the alternatives button, the
stitch positioning will be shown instead of the
stitch width setting and the density will be shown
instead of the length setting.
Wheel (12)
Use these buttons to move around the graphic
display. The wheel has up and down arrow
buttons, left and right arrow buttons and the wheel
center icon is a checkmark for OK.
They have several functions, for example stepping
between stitches, setting the size of a buttonhole
and moving between options in the settings menu.
ConÀ rm your selections with the wheel center icon
for OK.
Direct selection (13)
By pressing one of, or a combination of, the 0 to 9
buttons, you select the stitch represented by that
number immediately.
F1 - Function 1 (14)
The F1 button is used to activate the tie-off
options. It is also used to repeat buttonholes and to
deactivate repeat for darning stitches. All selections
will be shown on the graphic display.
Settings menu (15)
Press this button to open the menu for machine
settings.
Stitch restart (16)
When having stopped sewing in the middle of a
stitch, press restart to start sewing at the beginning
of the stitch again without having to reset any
special settings you have made.
If pressing the stitch restart button while sewing,
the stitch will be À nished and the machine will
then stop.
Mirror side to side (17)
For mirroring stitches side to side.
