478173
34
Zoom out
Zoom in
Previous page
1/142
Next page
2:14
Preparations
8. You may now connect your embroidery
machine to your computer. A message will
appear and you will be informed when your
embroidery machine is ready to be used.
Windows® XP
6. From the main menu of your CD, click the
Install Drivers option for Windows® XP.
Drivers are only available for 32-bit Windows® XP.
7. During the installation process, if existing
drivers are found, you will be informed that
drivers have been removed and that the
computer must be restarted. Click OK to restart
the computer. Installation will resume after the
computer has restarted.
8. At the end of the installation, you will be
prompted to connect your embroidery
machine. Click Finish on the last page. Leave
your 5D™ Embroidery System software CD in
your computer.
9. The Found New Hardware wizard will appear.
Select ’No, not at this time’ on the À rst page,
then click Next. Select ’Install the software
automatically’, then click Next. A warning will
appear that the drivers are not signed. This is
normal and should not be a cause for concern.
Click Continue Anyway, and the driver
installation will complete automatically.
How to launch the programs
Shortcuts on the Desktop
1. Double-click on the Shortcut to the 5D™
Embroidery System program folder. A list of
programs appears.
2. Double-click on 5D™ Organizer, 5D™
QuickFont or 5D™ ConÀ gure to launch it.
Alternatively use the Start Menu to open modules
under Start, All Programs, 5D™ Embroidery
System.
Viewing and printing PDF Guides
To À nd all the Reference and Sample Guides for
your 5D™ Embroidery System software, go to
Start, All Programs, 5D™ Embroidery System
then choose Reference Guides or Sample Guides.
Choose relevant folder, then select the desired PDF
Guide. Double-click on the desired name to launch
the relevant .pdf À le if you have Adobe Acrobat
installed on your computer. To install the Acrobat
Reader, insert the 5D™ Embroidery System CD
and select that option from the menu that appears.
Embroidery Machine Communication
module
The Embroidery Machine Communication
module must be active (
or ) to use your
embroidery machine with your computer. The
icons are found in the lower right corner of your
computer screen. If the Embroidery Machine
Communication module is not active, it may be
started from the Send tab of 5D™ ConÀ gure.
How to update your machine
Be sure to consult the web site at www.pfaff.com
and/or your local authorized PFAFF® dealer
for updates and upgrades for your machine and
Owner’s manual.
You can update your machine using the USB
embroidery stick or the USB cable packed with
your machine (P/N:412 62 59-04).
Updating instructions
Go to the PFAFF® web site at www.pfaff.com
to À nd information about available updates.
Follow the update wizard to prepare your USB
embroidery stick for the update.
While pressing and holding the stitch restart
button and needle up/down button, turn your
machine on to start in update mode. Follow
the instructions on the PFAFF® HD screen to
update.
34


Need help? Post your question in this forum.

Forumrules
1

Forum

pfaff-creative-vision-5.5

Reset search

  • Where can I find the number of stitches sewn on the Pfaff Creative Vision
    Submitted on 8-4-2022 at 15:04

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Creative Vision 5.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Creative Vision 5.5 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Creative Vision 5.5

Pfaff Creative Vision 5.5 User Manual - German - 142 pages

Pfaff Creative Vision 5.5 User Manual - Dutch - 142 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info