749983
15
Zoom out
Zoom in
Previous page
1/211
Next page
Introduction
Function Buttons
1. Presser foot up and extra lift
2. Presser foot down and pivot
3. Automatic needle threader
4. Cut function
5. Immediate tie-off
6. Stitch restart
7. Needle stop up/down
8. Start/stop
9. Reverse
10. Indication Light
Presser Foot Up and Extra Lift
Touch the presser foot up button once to raise the
presser foot. Touch again and the presser foot will raise
to extra lift position, and the feed teeth will be
automatically lowered to make it easier to get heavy
fabric under the presser foot.
In embroidery mode, the extra lift makes it easier to
insert or remove the hoop.
Presser Foot Down and Pivot
The presser foot is lowered automatically when you start
sewing. To lower the presser foot before starting to sew,
touch the presser foot down and pivot button. The
presser foot will be completely lowered and the machine
firmly holds the fabric. Touch presser foot down again to
go to pivot position.
In embroidery mode touch presser foot down to lower
the presser foot to embroidery position.
Automatic Needle Threader
See Using the Automatic Needle Threader, page 38 to
learn how to place the thread for automatic needle
threading. When the thread is in place, touch this button
to thread the needle automatically.
To prevent damage to the automatic needle threader,
needle, presser foot or other attached accessories, read
the instructions carefully on how to use the
automatic needle threader before using it.
Cut Function
Touch the cut function button and your machine cuts the upper and bobbin threads and raises the presser foot and
needle.
To cut threads at the end of a stitch or stitch sequence, touch the cut function button while sewing. The indicator light
will intensify, alerting you that a cut is requested. When the stitch or stitch sequence is completed, your machine cuts
the upper and bobbin threads and raises the presser foot and needle.
Note: If automatic presser foot lift has been deselected in temporary session settings the presser foot will not be raised when using
the cut function.
Touch the cut function button when embroidering and your machine cuts the upper and bobbin threads instantly.
2
3
4
5
6
8
9
7
1
10
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Creative Icon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Creative Icon in the language / languages: English as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Creative Icon

Pfaff Creative Icon User Manual - German - 234 pages

Pfaff Creative Icon User Manual - Dutch - 230 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info