478157
48
Zoom out
Zoom in
Previous page
1/72
Next page
4646
Important notes on sewing with the cover
stitch
The power table is marked with various units
of measurement. The upper fi gures are in cm.
The lower fi gures are in inches.
Note: The hemmer guide H2 is available as
an optional accessory. With this optional
accessory you can hem your fabric
effortlessly without having to press under the
hem edge prior to sewing the cover stitch.
Preparing the fabric:
When not using the H2 optional accessory
guide, it is useful to press under the fabric
edge before hemming it. The width of fabric
to be pressed under must be 0.5 cm wider
than the fi nished hem width. Example: Press
under a one inch (2.5 cm) fabric width to sew
a fi nished hem of 3/4 inch (2 cm).
Note: Set the seam width at 3.5 cm.
To start sewing:
Raise the presser foot and place the fabric
under the presser foot so the needles pierce
the fabric for the fi rst stitch. Position the
fabric at the desired width using the marked
guidelines on the power table. When starting
to sew, pull the fabric taut towards the rear
and sew slowly. The speed may be increased
as you sew further along the fabric.
Finishing sewing:
1. When sewing to the end of the fabric:
Tightly hold the threads at the end of the
seam. Sew slowly off the fabric while lightly
pulling the threads toward the rear of the
machine.
Note: The differential feed may need to be
adjusted slightly to allow your fabric to lie
perfectly smooth. Test your settings fi rst on
a piece of scrap fabric.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Coverlock 4852 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Coverlock 4852 in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Coverlock 4852

Pfaff Coverlock 4852 User Manual - German - 72 pages

Pfaff Coverlock 4852 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info