478161
33
Zoom out
Zoom in
Previous page
1/44
Next page
5-8 cm
(2-3“)
Stitches & sewing techniques 33
Start sewing
Pin Placement
When securing the fabric pieces using pins, insert straight
pins to the left of the presser foot. The pins will be easy to
remove and are away from the cutters.
Sewing over pins will damage and might destroy the
cutting edge of the cutters.
When the machine is completely threaded, close the
front cover and bring all of the threads over the stitch
plate and slightly to the left under the presser foot.
Ensure that the upper blade moves against the lower
blade correctly by turning the handwheel slowly
toward you. If the blades are not moving correctly,
check if there are any fabric or waste thread stuck
between the blades.
Hold the threads and pull them slightly.
Turn the handwheel toward you two to three complete
turns to start making a thread chain. Check if all
threads wind around the stitch À nger of the stitch plate.
If the threads do not wind around the À nger, make sure
each thread is threaded correctly.
Continue holding the thread chain while pressing the
foot control. Sew until the chain is 5-8 cm (2-3”) in
length.
Place fabric under the front of the presser foot and sew
a test sample. Guide the fabric slightly with your left
hand while sewing. Do not pull on the fabric as this
may deÁ ect the needle, causing it to break.
Chain off
When you reach the end of the fabric, continue sewing
while drawing the À nished fabric gently backwards
and to the left. This is called chaining off. It prevents
the threads from coming undone and prepares for the
next sewing task.
Cut off the thread chain 2-5 cm (1-2”) behind the
presser foot using the thread cutter on the left side of
the machine. Pull the threads around the thread cutter
from the back, then toward you.
Tip: When you have re-threaded the machine, always chain off
and test sew a sample to test thread tension.
Tip: The presser foot on this machine has marks to indicate the
needle position. Use this as a guide when sewing.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Coverlock 4.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Coverlock 4.0 in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Coverlock 4.0

Pfaff Coverlock 4.0 User Manual - German - 44 pages

Pfaff Coverlock 4.0 User Manual - Dutch - 44 pages

Pfaff Coverlock 4.0 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info