478148
40
Zoom out
Zoom in
Previous page
1/52
Next page
3:17
0 4.0 - 2-3 -/0
Sewing
Prog.
Sewing on buttons
With Button sewing program 0 you can easily sew on two and
four-hole buttons.
Remove the presser foot and lower the feed dog.
Mark the button position on your fabric. Place the button on
the marked fabric.
Turn the handwheel towards you and position the button so
the needle enters the left hole in the button.
Lower the presser foot lifter. The button will be held in
place by the shank of the foot. Turn the handwheel to make
sure the needle also enters the right hole of the button.
Continue sewing on the button. The machine will complete
the program for you.
Buttonhole tips:
A wider, less dense buttonhole is recommended on heavy
fabrics.
Use presser foot No. 1 for buttonholes that are to be sewn
very close to a reinforced edge.
Materials that shift or stretch easily should be reinforced
with water-soluble, tissue paper or other lightweight
stabilizer.
Keyhole buttonholes are particularly stable and durable
if a gimp thread is inserted while sewing (see "Keyhole
buttonhole with gimp thread").
Linen buttonholes are particularly dense and attractive if
you use buttonhole twist thread.
Buttonholes are normally selected a little larger than
the button diameter. It is important to always sew a test
buttonhole on the same fabric/stabilizer as your project
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff ClassicStyle 2029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff ClassicStyle 2029 in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info