478148
29
Zoom out
Zoom in
Previous page
1/52
Next page
3:6
1 2.5 3-5 0
1 3 3-5 4
Sewing
Explanation of the sewing recommendations table
In the following table you will À nd the settings we
recommend for different sewing purposes.
These tables give you further information required for
sewing the selected stitches – whether you should sew with
the Integrated Dual Feed (IDT) engaged or disengaged,
needle thread tension setting and recommended presser
foot,.
Stitch
Stitch Stitch number
Stitch width in mm
Stitch length in mm
IDT switched on
switched off
Needle thread tension
Number of presser foot
Sewing in zippers
There are different ways to sew in zippers. Follow the
directions included with your pattern for best results.
For all types of zippers it is important to sew close to the teeth
of the zipper. The zipper foot can be snapped to the presser
foot ankle on the left or right, depending on how you will insert
your zipper. Then set the needle position so that it enters close
to the edge of the zipper teeth by using one of the 13 needle
positions available. If the presser foot is attached on the right
side, the needle must only be moved to the right. If the foot is
attached on the left, the needle must only be moved to the left.
Straight stitch
Stitch 1 is the basic straight stitch in center needle position.
The stitch length can be increased up to 6 mm. Change the
needle position of the straight stitch to sew in a zipper or
topstitch along the edge of a collar. The expression 2028
have 13 needle positions that can be adjusted with the -/+
button A.
Stitch
Stitch
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff ClassicStyle 2029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff ClassicStyle 2029 in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info