525696
28
Zoom out
Zoom in
Previous page
1/36
Next page
28
B
A
Sewing
Blindhem
The blindhem stitch number 01 (pattern selection)
is used to make invisible hems on skirts, trousers
and home decorating. Use foot number 3 with
IDT™ system.
1. Finish the edge of the hem.
2. Fold and press the hem allowance to the wrong
side.
3. Fold the hem back on itself so approximately
3/8” (1 cm) of the nished edge extends
beyond the fold. The wrong side of your
project should now be facing up.
4. Place the fabric under the presser foot so that
the fold runs along edge guide A.
5. When the needle swings into the fold it should
catch a small amount of fabric. If the stitches
are visible on the right side, adjust edge guide
A by turning adjusting screw B until the stitch
that catches the hem just barely shows.
Elastic blindhem stitch
The elastic blindhem stitch number 02 (pattern
selection) is especially suitable for stretchy fabrics,
because the zigzag in the stitch lets the stitch
stretch. The hem is nished and sewn at the same
time. There is no need to nish the raw edge rst
on most knits.
Sewing in zippers
There are different ways to sew in zippers. Follow
the directions included with your pattern for best
results.
For all types of zippers it is important to sew close
to the teeth of the zipper. The zipper foot 4 can be
snapped to the presser foot bar on the left or right,
depending on how you will insert your zipper.
Set the stitch position so the needle enters close to
the edge of the zipper teeth by using one of the 29
needle positions available for the straight stitch. If
the presser foot is attached on the right side, the
needle must only be moved to the right. If the foot
is attached on the left, the needle must only be
moved to the left.
Blindhem stitch
number 01
Elastic blindhem
stitch number 02
28


Need help? Post your question in this forum.

Forumrules
1

Forum

pfaff-ambition-essential

Reset search

  • Mijn pfaff ambition Essential blokkeerd ik heb de machine al meerdere malen binnen gebracht dan kan ik weer wat maken 1 broek omzomen of iets repareren rits in zetten daarna weer probleem wil niet voor of achteruit en geeft een geluid dat hij wel wil maar niet kan echt van soort bonkend tikkend geluid Submitted on 21-7-2021 at 10:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Ambition Essential at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Ambition Essential in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Ambition Essential

Pfaff Ambition Essential User Manual - German - 36 pages

Pfaff Ambition Essential User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info