749978
42
Zoom out
Zoom in
Previous page
1/68
Next page
Operating your quilt ambition™ 630
sewing. The indicators (3 & 5) will be lit and the machine
will cut the threads after the stitch or sequence has
completed.
Start/Stop Button
Press this button to start or stop the machine without
using the foot control. Press the button once to start and
press it again to stop.
Reverse Button with Indicator
For permanent reverse, press the button before starting
to sew. The reverse indicator will be lit and the machine
sews in reverse until you press the button again to cancel.
If you press the reverse button while sewing, the
machine sews in reverse for as long as you keep the
button pressed. The reverse indicator is lit when the
reverse button is pressed. Reverse is also used when
sewing darning stitches.
Speed Control Lever
The speed control lever sets the maximum sewing speed.
To increase sewing speed, slide the lever upwards, to
decrease sewing speed, slide the lever downwards.
Settings Menu
In the settings menu, you can adjust the machine
settings, sound settings and screen settings. Open by
touching the settings button in the graphic display.
Select the setting you wish to adjust by touching the up
or down arrow buttons. Touch the + and buttons to
adjust the values. Activate settings by touching the
circle. A highlighted green circle means a function is
activated, an empty circle means it is not activated.
Touch the settings menu button again to close the
settings menu.
Thread Tension
Your sewing machine will electronically pre-set a thread
tension for the selected stitch. Depending on the fabric,
batting, thread etc, the tension may need to be adjusted.
Touch the + or buttons on the graphic display to
adjust the thread tension. The changes only affect the
selected stitch. The setting will go back to default when
you select another stitch.
Twin Needle
Activate the twin needle program in the settings menu.
Use the + or buttons on the graphic display to set the
twin needle width. When a twin needle size is selected,
the width of all stitches is limited for that needle size to
prevent needle breakage.
In sewing mode, the twin needle
recommendation icon will be shown. The
setting is kept until you deactivate it.
Note: Twin needle and stitch width safety cannot be used at
the same time.
Note: A warning pop-up will be shown if you select a stitch
that is too wide for the set twin needle size.
42
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Ambition 630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Ambition 630 in the language / languages: English as an attachment in your email.

The manual is 6,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Ambition 630

Pfaff Ambition 630 User Manual - German - 70 pages

Pfaff Ambition 630 User Manual - Dutch - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info