749977
61
Zoom out
Zoom in
Previous page
1/68
Next page
Maintenance
Replacing the Needle Plate
With the feed dogs lowered, replace the needle plate
and insert and tighten the two needle plate screws.
Replace the bobbin cover.
Troubleshooting
In this troubleshooting guide you will find solutions to
the problems you may have with your machine. For
further information please contact your local authorized
PFAFF® dealer who will be happy to help you.
General Problems
Thread snips do not cut the thread? Remove needle plate and clean lint from bobbin area.
Fabric does not move? Make sure that the feed dogs are not lowered.
Wrong stitch, irregular or narrow stitch? Deactivate twin needle or stitch width safety in the
settings menu.
The needle breaks? Insert needle correctly as described, see page 26. Attach
correct needle for the fabric.
The machine will not sew? Check that all plugs are securely plugged into the
machine and into the wall socket. Check that the foot
control cord is securely plugged into the front socket on
the bottom right side of the machine.
Push bobbin winder lever to sewing position.
The sewing machine function buttons do not respond to
touch?
The sockets and function buttons on the machine can be
sensitive to static electricity. If the buttons do not
respond to touch, turn the machine OFF and then ON
again. If the problem persists, contact your local
authorized PFAFF® dealer.
The Machine Skips Stitches
Did you insert the needle properly? Insert needle correctly as described, see page 26.
Did you insert a wrong needle? Use needle system 130/705 H.
Is the needle bent or blunt? Insert a new needle.
Did you thread the machine properly? Check how the machine is threaded.
Is the correct presser foot used? Attach correct presser foot.
Is the needle too small for the thread? Make sure the needle is correct for the thread and fabric.
Needle Thread Breaks
Did you insert the needle properly? Insert needle correctly as described, see page 26.
Did you insert a wrong needle? Use needle system 130/705 H.
61
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Ambition 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Ambition 620 in the language / languages: English as an attachment in your email.

The manual is 6,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Ambition 620

Pfaff Ambition 620 User Manual - German - 70 pages

Pfaff Ambition 620 User Manual - Dutch - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info