749977
57
Zoom out
Zoom in
Previous page
1/68
Next page
Sewing
Free-Motion Stippling
Free-motion stippling adds texture and interest to your
quilt, while keeping the layers together. Free-motion
stippling is done with the feed dogs lowered. You move
the fabric manually to determine the stitch length.
1. Set your sewing machine for free-motion sewing
with a straight stitch.
2. Attach the optional Open Toe Free-Motion foot.
Disengage the IDT™ system and lower the feed dogs.
3. Begin by pin basting your quilt through all layers
with safety pins, starting from the center of your
quilt and working out. Place a pin every 6-8 inches
(15-20 cm).
Note: Practice stippling on scraps of the fabric and batting
from your quilt. It is important to move your hands at the
same speed as the needle to prevent stitches that are too
long or too short. Maintaining a consistent speed while
free-motion sewing will also help keep stitches even.
4. Begin near the center of your quilt. Take one stitch
and pull the bobbin thread to the top of the quilt.
Take a few stitches right next to one another to lock
the threads.
5. Plan a path for your stitching, then begin stitching
your desired stipple pattern, moving the quilt as you
go. The stitching should not cross over itself and
should travel in a meandering motion.
Blindhem Stitch
The blindhem stitch is used to make invisible hems on
skirts, trousers and home décor projects. Use foot
number 3 with the IDT™ system.
1. Finish the edge of the hem.
2. Fold and press the hem allowance to the wrong side.
3. Fold the hem back on itself so approximately 3/8" (1
cm) of the finished edge extends beyond the fold.
The wrong side of your project should now be facing
up.
4. Place the fabric under the presser foot so that the
fold runs along edge guide (A).
5. When the needle swings into the fold it should catch
a small amount of fabric. If the stitches are visible on
the right side, adjust edge guide (A) by turning
adjusting screw (B) until the stitch that catches the
hem just barely shows.
57
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Ambition 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Ambition 620 in the language / languages: English as an attachment in your email.

The manual is 6,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Ambition 620

Pfaff Ambition 620 User Manual - German - 70 pages

Pfaff Ambition 620 User Manual - Dutch - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info