750005
16
Zoom out
Zoom in
Previous page
1/44
Next page
Preparations
Threading the Machine
Make sure that the presser foot is raised and the needle
is in its highest position.
1. Place a felt pad and the thread spool on the spool
pin and fit a spool cap of the right size and direction.
Note: Hold thread with both hands to prevent it from
slacking while threading. This ensures that the thread will
be positioned properly in the threading path.
2. Pull the thread under the thread guide (A) from the
right to the left.
3. Pull the thread from the right to left along the slot.
4. Pull the thread between the tension discs (B).
5. Thread down through the right-hand threading slot
and then upwards through the left-hand threading
slot.
6. Bring the thread from the right into the take-up lever
(C) and down in the left-hand threading slot into the
needle thread guide (D).
7. Thread the needle.
Needle Threader
The needle threader allows you to thread the needle
automatically. The needle must be in its highest position
to use the built-in needle threader. Press the needle up/
down button to make sure the needle is fully raised.
We also recommend lowering the presser foot.
1. Use the handle (A) to pull the needle threader all the
way down. Metal flanges encase the needle and a
small hook will pass through the needle eye.
2. Place the thread from the back over the thread guide
(B) and under the small hook (C).
3. Let the needle threader gently swing back. The hook
pulls the thread through the needle eye and forms a
loop behind the needle. Pull the thread loop out
behind the needle.
4. Raise the presser foot and place the thread under it.
Note: The needle threader is designed to be used for size 70-
120 needles. You cannot use the needle threader for size 60
needles or smaller, wing needles or twin needles.
There are also some optional accessories that require manual
threading of the needle.
When threading the needle manually, make sure that the
needle is threaded from front to back.
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Ambition 610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Ambition 610 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Ambition 610

Pfaff Ambition 610 User Manual - German - 48 pages

Pfaff Ambition 610 User Manual - Dutch - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info