750008
37
Zoom out
Zoom in
Previous page
1/44
Next page
A B
C D
E
F
G
MACHINE MAINTENANCE37
MACHINE MAINTENANCE
Cleaning the Upper Cutter Area
Turn off the main power switch and unplug the machine.
Cleaning the Feed Teeth
Open the front cover.
With a forward brushing movement, use the lint brush to
remove any lint.
Note: You may use a vacuum cleaner to clean the upper knife
area or feed teeth.
Turn off the main power switch and unplug the machine.
Deactivate the stitch nger by setting it in “R” position (A).
Open the side and front covers.
Remove the needle(s) and the presser foot.
Remove the set screw (B) with the large screw driver. Re-
move the needle plate.
Use the lint brush to remove any lint from around the
feed teeth (C).
Place the stitch plate over the feed teeth, making sure the
tab of the stitch plate (D) is inserted under the edge of the
cover (E). The hole in the stitch plate (F) should align with
the knob on the machine (G).
Replace and tighten the set screw.
Attach the needle(s) and the presser foot.
Close the side and front covers.
An overlock requires more frequent maintenance than a conventional sewing machine for two reasons:
A lot of lint is produced when the cutters are cutting the fabric.
An overlock runs at a very high speed and needs to be oiled frequently to lubricate the internal working parts.
Storage
When the machine is not in use, be sure to keep it unplugged. Store the machine, so it is not exposed to direct sunlight
or humidity.
Servicing
If you have any questions regarding service and/or operation, contact our Customer Care department.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Admire Air 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Admire Air 5000 in the language / languages: English as an attachment in your email.

The manual is 7,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Admire Air 5000

Pfaff Admire Air 5000 User Manual - German - 44 pages

Pfaff Admire Air 5000 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info