478906
26
Zoom out
Zoom in
Previous page
1/49
Next page
Trouble
Shooting
1.
Machine
Skips
Stitches
Cause:
Remedy:
Needle
incorrectly
inserted.
Push
needle
up
as
far
as
it
will
go
and
be
sure
that
the
long
groove
faces
toward
you,
and
flat
side
of
shank
away
from
you.
Wrong
needle.
Consult
needle
and
thread
chart
on
page
12.
(For
ordinary
sewing,
use
System
130
R
needles.)
Needle
bent.
Insert
new
needle.
Machine
threaded
improperly.
Check
and
correct
threading
as
instructed
on
pages
14
and
15.
Needle
too
fine
or
too
thick
for
the
thread.
Use
correct
needle
and
thread
(see
page
12).
2.
Needle
Thread
Breaks
Cause:
Remedy:
The
above-mentioned
may
cause
thread
See
remedies
listed
under
1.
above.
breakage.
Thread
tension
too
tight.
Adjust
tensions
as
instructed.
Poor
or
knorty
thread
used.
Use
good
quality
threads
only.
4:
Hook
raceway
is
jammed
with
thread
or
needs
Clean
and
oil
hook
raceway.
oiling.
Burrs
or
sharp
edges
on
needle
plate
slot.
Polish
needle
plate
slot
with
fine
emery
cloth.
25
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff 73 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff 73 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info