49556
6
Zoom out
Zoom in
Previous page
1/70
Next page
1 - 1
Safety
1 Safety
1.01 Regulations
This machine has been made according to the European regulations indicated in the
conformity and manufacturer’s declarations.
In addition to this instruction manual, please also observe all generally accepted statutory
and other legal requirements, including those of the user’s country, and the valid pollution
control regulations!
The locally valid regulations of the social insurance institution responsible for occupational
accidents, or other supervisory authorities, must be strictly adhered to!
1.02 General notes on safety
The machine must only be operated when the instruction manual has been fully read and
understood, and only by operators who have had the necessary training!
All notes on safety and the instruction manual of the motor manufacturer must be read
before the machine is put into operation!
All notices on the machine referring to danger and safety must be observed!
The machine must be used for the purpose it is intended for and must not be operated
without its safety devices; all regulations relevant to safety must be adhered to.
When part sets are changed (e.g. needle, presser foot and needle plate), during
threading, when the workplace is left unattended and during maintenance work, the
machine must be isolated from the power supply by pressing the on/off switch or
removing the plug from the mains!
Daily maintenance work must only be carried out by appropriately trained persons!
Repairs and special maintenance work must only be carried out by qualified technical
staff or persons with the appropriate training! Exceptions to this are only allowed for
adjustment and function checks by appropriately trained personnel!
Repair work and special maintenance work must only be carried out by technical
personnel or by persons with the appropriate training!
Work on the electrical equipment must only be carried out by technical staff who are
qualified to do so!
Work on parts or equipment connected to the power supply is not permitted! The only
exceptions to this are specified in regulations EN 50110.
Conversion or modification of the machine must only be carried out under observation of
all relevant safety regulations!
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff 1295 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff 1295 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info