478670
74
Zoom out
Zoom in
Previous page
1/78
Next page
Adjustment
11.0515
Tension
release
bar
Taking
care
to
ensure
that
the
cut-off
mechanism
is
in
resting
position,
raise
the
presser
foot.
Loosen
screws
1
Set
transmission
bar
2
(screws
3)
to
the
height
stipulated
in
requirement
1.
On
machines
without
automatic
presser-foot
lifter
(subclass
-910/..),
bracket
4
must
be
unscrewed
to
obtain
access
to
screws
3.
By
turning
the
handwheel,
bring
the
machine
to
needle
rise
position
and
manually
activate
the
engaging
lever.
Requirement
1.
With
the
cut-off
mechanism
in
resting
position
and
the
presser
foot
raised,
there
must
be
a
distance
of
approx.
7
mm
between
the
left
edge
of
release
bar
8
and
housing
9.
2.
When
the
point
of
thread
catcher
5
is
at
the
same
height
as
the
rear
edge
of
stop
trip
6
of
the
needle
plate
(see
arrow)
with
the
presser
foot
resting
on
the
needle
plate,
the
tension
discs
must
be
loosened
to
such
an
extent
that
the
needle
thread
can
be
easily
pulled
through
them.
Fig.
11
3O
11
-
36
PFAF
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff 1246 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff 1246 in the language / languages: English as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info