6/16
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
CONTROLS AND INSTRUMENTS
The instrument panel initializes itself every time the ignition is
switched on. A function test of the display unit segments and
lighting of all indicator lights are performed automatically. The
two hands (speedometer and revolution counter) move
simultaneously from the minimum to the maximum and back.
If they don't work, have the system checked by a registered
dealer.
1. Speedometer
• Double-scale speedometer showing kilome
ters and miles.
2. Revolution counter
• The analogical tachometer indicates the engine's rotation
speed and maintains it within its ideal use range, thus
preventing it from reaching the red zone.
3. Brake system indicator light. ABS/PBS
1
"STOP" light
1
• (ABS/PBS only)-The indicator light turns on when switching
on the ignition. The warning light only goes off when the
machine exceeds 5 km/h. If the indicator light turns on
intermittently or remains on, you are advised to stop the
vehicle and have it checked by an authorised dealer.
• "STOP" -The indicator light goes on with the ignition and
turns off when the engine has started. If the indicator light
turns on when riding, you are advised to have the vehicle
checked by an authorised dealer.
4. Oil pressure indicator light
• The indicator light goes on with the ignition and turns off
when the engine has started. If the indicator light turns on
intermittently or remains on, you are advised to stop the
vehicle and have it checked by an authorised dealer.
5. Direction indicator warning light Hazard warning light
indicator
• The instrument panel is equipped with one flasher unit per
side. A buzzer reminds the driver of the direction
indicators. The buzzer only works with the hazard warning
lights if the ignition is turned on.
6. Main beam control
7. Transponder-equipped immobiliser diagnostic warning
light/Deterrence light
• When the engine is off, the light flashes regularly to indicate
that the anti-theft system is activated; this is the deterrent
function..
• To save the battery, the deterrent tell-tale lamp goes off if
the vehicle is not used for over 48 hours.
• If, when the ignition is turned on, the indicator flashes briefly
and remains on, the diagnostic function has detected a
malfunction on the anti-theft system and the engine will not
be able to start; the system will have to be checked by an
authorised dealer.
8. Injection system diagnostic warning light
• The light comes on when the ignition is turned on to check
it is operational and comes off as soon as the engine starts
if there is no incident.
If an incident occurs, the driver is informed by the light.
There are three fault levels on the machine. (depending on the
model)
• Serious safety fault or fault which could lead to destruction
of the engine, the vehicle must be stopped. The light
comes on and stays on.
• Serious fault affecting the functioning or riding comfort. The
engine speed is restricted to 6000 rpm Satelis
Compressor only). The light flashes.
• Minor fault. The light stays off. The fault will be processed
during servicing.
In case of a fault, an emergency strategy is applied whenever
possible, so that the driver can reach the nearest sales point.
9. Saddle opening warning light
• The warning light will come on if the saddle is not locked.
10. Display control knob
11. Multi-function display
DISPLAY FUNCTIONS
A. Milometer.
The machine total kilometres remains in the memory when the
battery is disconnected. The machine total kilometres
remains in the memory when the battery is disconnected.
B. Tripmeter.(TRIP)
The tripmeter displays and stores the number of kilometers
travelled during a given period.
Resetting the tripmeter
Resetting the tripmeter is done from the TRIP position.
• Press the control button (several times briefly) until the
figures of the daily odometer flash.
• Press the control button (1) for more than 3 seconds to
reset the daily tripmeter.
C. Setting the clock
• Press the control button (several times briefly) until the
figures of the clock flash.
• Pressing the control button (1) for more than
3 seconds will
make the two hour digits flash.
1. Depending on model
ABS
km
°C
C
F
E
H
Trip
EFI
km/h
mph
70
10
20
30
40
50
60
80
90
100
110
10
0
30
50
70
90
110
130
150
170
X1000 r/min
0
1
2
3
4
5
6
7
8
9
10
11
12
3
11
9
5
7
10
5
6
8
2
4
1
km
Miles
°C
°F
C
F
E
H
Trip
A
C
F
E
D
J
B
1
H
I
G
K
NOTICE_SATELIS-04D.mif Page 6 Vendredi, 26. mars 2010 2:34 1
4
