Elystar ADV 4
Temps
13
Starting the engine
For safety reasons :
- Put the scooter on its central stand
The electric starter will not work unless you squeeze the left
brake lever.
To start the engine :
- Turn the ignition key to the position
- Grip the left or front right lever
- Press the starter button
- Release the button when the engine starts
Keep the throttle closed
Precautions
Never run the engine in a closed room. Exhaust gases
contain carbon monoxide and toxic gases.
- De-flooding the engine
- After several attempts to start the engine, it may be
necessary to ventilate the cylinder in order to eliminate any
fuel excess.
- Turn the ignition key
- Turn the gas grip fully (throttle opening)
- Press the starter button for a few seconds
- Close the throttle and carry out starting procedure
again
Stopping the engine and
parking
With the engine running at iding speed
- Put the ignition key to
- Put the vehicle on its stand
- Turn the key to the position (locking the
steering) in order to avoid risk of theft
- Remove the key to prevent risks of theft
- Parking on the stand
- Avoid driving or parking on easily inflammable
materials (eg : dry leaves, …)
The stand is fitted with a lever to park the scooter easily.
- Move to the left side of the scooter
- Hold the scooter by its handlebar and the grab handle
at the back of the saddle
- Push the stand lever with your right foot while
pulling the scooter backwards with the handlebars and the
saddle's grab handle
- Placing on side stand *
Bearing in mind that the isde stand is equipped with an
automatic lift mechanism, be careful when carrying out
different operations on the vehicle.
Caution
Make sure that the vehicle is stable on its stand so that
it cannot fall over and possibly cause any body wound
or any damage to the scooter.
* According to the model
