76
PRACTICAL INFORMATION
Third brake lamp
(Four W 5 W bulbs)
Unscrew the 2 fi xing bolts A .
Release the lamp unit by pushing
the two tabs B inwards.
Disconnect the connector and the
rear screen wash pipe.
Remove the bulb holder.
Remove the bulb and change it.
When refi tting, proceed in the reverse
order and ensure that the lamp
unit seal and the rear screen wash
pipe have been put back in place
correctly.
Do not tighten the bolts more
than is necessary at the risk
of breaking the lamp.
remove the bulb holder by
spreading the four tongues B ,
remove the bulb and change it.
Note: when refi tting, proceed in
the reverse order and take care to
position the bulb holder, the tabs and
the lamp unit correctly.
Number plate lamps (W 5 W)
Pass your hand under the
bumper.
Remove the bulb holder turning it
one quarter of a turn.
Remove the bulb and change it.