766103
14
Zoom out
Zoom in
Previous page
1/55
Next page
26 27
4) With the battery compartment still open,
choose the remote control channel that matches
the channel you set the base unit to in Step 2.
5) Open the system’s food bin lid. Place the
disc that fits the size of kibble or treats
you will be using. The Treat&Train™ system
requires dry dog food, dry treats or semi-
moist treats that fit through the food disc
holes on either the large or small-sized
kibble disc. Round or oval-shaped treats or
kibble of uniform size work best. See a list
of foods that work well in the Treat&Train™
system at https://drsophiayin.com/app/
uploads/2016/01/tnt_dog_foodsm.pdf.
6) Load the food bin with 1-2 cups of food.
Since your dog will be earning his meals out of
the system, fill the machine with approximately
one meal’s worth of food.
NOTE: If you hit DOWN-STAY, the light on the base unit will turn on. To turn it
off, hit the DOWN-STAY button again.
10) Test whether the food is the optimal size for dispensing. When food is too
large, gets stuck, or does not make it into a disc hole, the disc will continue to
spin until the next hole can dispense its treat. When food is the right size for the
disc, it will dispense from every hole. Press DISPENSE 20 times in a row to see
if treats are dispensed with each hole or if the machine sometimes skips one or
more holes. If it skips more than one or two times, try a different size, shape or
texture of food.
3.4 Overview of the Control Panel
The control panel has basic controls and more advanced down-stay settings you
won’t need until Game 3 (Down-stay stage) of training.
On-off switch: Turns the base unit on and off. Set it to ON for all system operations.
Indicator light: Turns green when the unit is on. If it’s red it indicates the batteries
are low. A slow, blinking green power light indicates the unit is in sleep mode—
which occurs after 30 minutes of non-use. To wake up the Treat&Train™ system
press any button on the remote.
DOWN-STAY CONTROLS AND LIGHT
Single treat setting: Dispenses one treat at a time when DOWN-STAY mode is
activated (see below).
Multi-treat setting: Dispenses treats 5 times in succession when in DOWN-STAY
mode.
Cue dispense setting: Alerts you when to press the DISPENSE button during
DOWN-STAY mode. In this setting the timer will beep, but food won’t dispense
until you press the DISPENSE button.
Fixed or variable switch: Determines whether treats are dispensed at the
fixed time interval chosen on the TREAT RATE dial or on a more unpredictable
interval—one that averages the interval chosen. In most of the down-stay
exercises (Games 3 and 5) the switch is set to FIXED and each trial lasts one
minute. When set to VARIABLE, the down-stay repetition continues until the
machine is out of food.
TREAT RATE dial: Determines how frequently treats are dispensed during a
down-stay session.
Down-stay light: Indicates that the DOWN-STAY button on the remote control
has been pressed and the machine is in a down-stay session and is set to
dispense treats according to the timed TREAT RATE dial settings (e.g. for
Games 3 and 5). If the Down-stay light flashes on and off, check for dispenser
jam or see if the unit is empty. The unit will beep and the light will flash for one
minute before turning off automatically.
CHAPTER 3
Set-Up and Control Panel Instructions
CHAPTER 3
Set-Up and Control Panel Instructions
Remove the Treat&Train™ system when not in use until your dog has
completed Game 5 of training.
7) Turn the POWER on (dog should be
away from the machine). This will cause the
control panel indicator light to turn green.
If it’s red it indicates the batteries are low. A
slow, blinking green power light indicates the
unit is in sleep mode—which occurs after 30
minutes of non-use. To wake up the system,
press any button on the remote.
8) Set the VOLUME to “off” if the dog is in
the room. Some dogs need to get used to the
movement of the machine before they are
comfortable with the machine also emitting
a tone.
Ignore the DOWN-STAY controls. They are discussed in the next section.
9) Test the treat dispensing: Hit the
DISPENSE on the remote control to
dispense kibble. The treat should drop
into the treat bowl within a second. If
you hold the DISPENSE button down,
treats should continue to dispense until
you stop pressing.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe Treat and Train at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe Treat and Train in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Petsafe Treat and Train

Petsafe Treat and Train User Manual - German - 9 pages

Petsafe Treat and Train User Manual - Dutch - 9 pages

Petsafe Treat and Train User Manual - French - 58 pages

Petsafe Treat and Train User Manual - Spanish - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info