770993
9
Zoom out
Zoom in
Previous page
1/32
Next page
petsafe.com 9
EN FR
ES
7. Snap the lid of the capsule shut (6G). The
splice connection must be waterproof for
proper system performance.
Note: If your splice pulls loose, the entire
system will fail. Make sure your splice is
secure. Additional gel-filled splice capsules
and wire connectors are available through the
Customer Care Center.
8. Repeat for the other end of the buried
wire break.
The damaged wire should now be spliced
together with the new section of boundary
wire (6H).
Reconnect the Wires
After you have repaired the wire break, take
the locator and continue walking around
the entire boundary to verify that there
are no more wire breaks. If there are no
more wire breaks, you will hear intermittent
and continuous tones all the way around
the boundary.
Go back inside your home and disconnect
the 2 twisted boundary wires from the loop
terminals (7A) and connect them back to your
fence transmitter. Check that the loop light is lit
on the fence transmitter. If it is not lit, there may
be another break in the wire.
Disconnect the 2 ground wires (7B) and
store them along with the grounding stakes
in case you need to check for wire breaks in
the future.
Test the Fence System
Verify that your system is working with
the receiver collar. Slowly approach the
boundary wire while holding your test light
tool firmly on the receiver collar contact points
(7C). The test light tool will light up as the
receiver collar sends a static correction.
Verify that the receiver collar activates
approximately 610 ft. (1.8–3 m) from the
boundary wire as a warning zone before
placing the receiver collar on your pet.
Boundary
wire
6–10 ft.
(1.8–3.0 m)
7A
7B
7C
6G
6H
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe RFA-590 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe RFA-590 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info