771011
6
Zoom out
Zoom in
Previous page
1/11
Next page
Customer Care Center +1 (800) 732-2677
6
4
Assemble Pet Fountain
1. Rinse all fountain components (except for the
adaptor) with warm water before use. This will
remove any residue from the manufacturing
process. Place the foam filter inside the bowl as
shown.
2. Place the pump inside the foam filter on the
bottom of the bowl. The cord will be closest to
the hole on the back of the bowl. Press down on
the pump to engage the suction cups.
3. Once the pump is securely in place, feed the
cord through the hole on the back of the bowl
and out the notch on the bottom of the bowl.
4. Remove the extra slack from the cord and push
the rubber gasket firmly into the hole.
1
2
3
5. Attach the rubber connector to the pump tube if
it is not already attached.
6. Open the filter housing by using the tabs to pull
it apart.
7. Rinse the carbonlter thoroughly under cold
water to remove any loose carbon dust. Insert
the rounded side of the carbon filter into the
rounded side (Side A) of the filter housing.
8. Close the filter housing by aligning the clips
from the bottom and pressing down until it snaps
shut.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PWW00-16468 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PWW00-16468 in the language / languages: English as an attachment in your email.

The manual is 3.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info