771017
6
Zoom out
Zoom in
Previous page
1/8
Next page
+1 (800) 732-2677
6
Pump Maintenance
Important: Cleaning the pump is essential to the longevity of the pet fountain,
as well as the cleanliness of the water. Clean the pump every two weeks.
Warranty may be voided if the pump motor is not cleaned regularly.
1. Remove the pump from the pet fountain as explained in the “Pet Fountain
Disassembly & Cleaning” section.
2. Once the pump is removed, remove the impeller (white, 3-bladed
propeller) which is held in place magnetically. To remove the impeller, use
a fingernail to get underneath a blade and pull out.
3. Once the pump is disassembled you can clean the parts with warm water
and soap. Use a cotton swab or the “motor” brush from the Drinkwell®
Cleaning Kit to clean the pump’s motor cavity and remove any build-up.
For added disinfecting and hard water removal, clean the pump’s motor
cavity with a diluted vinegar solution (20% white vinegar and 80% water).
4. Once the parts are clean, replace the impeller into the pump’s
motor cavity.
Pet Fountain Reassembly
1. Turn the bowl upside down. Reattach the pump by pushing the threads of
the pump through the hole in the bowl. The pump goes in at a right angle
to the bowl (Fig. 7). If you cannot turn the pump into its resting position,
the pump is not pushed into the hole as far as it will go.
2. After turning the pump a quarter turn, it should now be even with the
bottom of the bowl. Turn the bowl back over.
3. Place the intake plate over the exposed portion of the pump found in
the bowl (Fig. 8).
4. Join the flow control knob and intake plate together by placing the tabs of
the flow control knob into the groove of the intake plate (Fig. 9).
5. Attach the housing by sliding the cutout in the wall of the housing down in
between the flow control knob and intake plate (Fig. 10). The housing
will click into place, when the side tabs are inserted in the bowl.
6. Place the pet fountain in desired location.
7. Replace the carbon filter and fill the housing, bowl, and reservoir with
water. Replace the housing lid.
8. Before you plug the pet fountain in make sure the electrical power cord,
the power adaptor and your hands are dry. Plug the pet fountain into a
standard electrical outlet.
Fig. 7
Intake
Plate
Fig. 8
Fig. 9
Fig. 10
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PWW00-13713 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PWW00-13713 in the language / languages: English as an attachment in your email.

The manual is 0.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info