• Avoid damaging the insulation of the loop wire; damage may cause areas of weak signal and lead to failure
of the boundary.
• Use care when mowing or trimming your grass not to cut the loop wire.
• Plug the surge protector into a grounded (3-prong) outlet that is within 5 ft. of the fence transmitter. ALWAYS
use a grounded (3-prong) outlet to ensure maximum protection.
• Do not remove the ground prong from the surge protector plug. Do not use a 3-prong plug to 2-prong outlet
converter. Doing so will make the surge protector ineffective against surges or spikes.
• Verify that the boundary loop and transmitter wires connect to the proper surge protector terminals. Reversed
connections will result in an increased risk of surge related damage.
• For added protection, when unused for long periods of time or prior to thunderstorms, unplug from the wall
outlet and disconnect the loop boundary wires. This will prevent damage to the transmitter due to surges.
Table of Contents
In the Box ................................................................................................................................................................................5
You May Also Need ..............................................................................................................................................................5
How the System Works .........................................................................................................................................................5
Step 1: Have Your Utilities Marked .....................................................................................................................................7
Step 2: Install the Surge Protector and Transmitter ............................................................................................................7
Step 3: Design Your Boundary Zone ...................................................................................................................................9
Step 4: Position, Twist and Splice the Boundary Wire ....................................................................................................12
Step 5: Connect the Wires ..................................................................................................................................................13
Step 6: Prepare the Receiver Collar ..................................................................................................................................14
Step 7: Set the Boundary Width and Test the Receiver Collar .......................................................................................16
Step 8: Bury the Boundary Wire ........................................................................................................................................18
Step 9: Place the Boundary Flags ......................................................................................................................................19
Step 10: Fit the Receiver Collar ..........................................................................................................................................20
Training ..................................................................................................................................................................................21
Wire Break Location Test ....................................................................................................................................................24
Terms of Use and Limitation of Liability ............................................................................................................................26
Important Recycling Advice ...............................................................................................................................................27
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Petsafe PUL-275 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Petsafe PUL-275 in the language / languages: English as an attachment in your email.
The manual is 3.06 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
