771310
12
Zoom out
Zoom in
Previous page
1/24
Next page
12 Customer Care Center 1-800-732-2677
2. If your pet has not stopped the misbehavior after two seconds of correction, release the Tone B
button, then press it again for up to two consecutive seconds.
3. Continue this sequence until the misbehavior has stopped.
4. Once the misbehavior has stopped, count out two seconds and then push the Tone A Button for two
consecutive seconds.
5. Reward your pet after pushing the Tone A Button approximately once every 3 to 5 times, to help your
pet maintain the association of the low tone with reward.
Find the Best Stimulation Level for Your Pet
Important: Always start at the lowest level and work your way up.
The Basic Remote Trainer has 12 different Stimulation Levels. This allows you to choose the stimulation
that is best for your pet.
Once you have placed the Receiver Collar on your pet, it is time to find the Stimulation Level that is
best for him. This is called the Recognition Level.
A slight change in your pet’s behavior, such as looking around in curiosity, scratching at his collar, or
flicking his ears, indicates the Recognition Level that is best for him.
Follow the steps below to find your pet’s Recognition Level:
1. Starting at Low ( I ) on the Stimulation Range Switch, press the Stimulation 1 button continuously for
1 to 2 seconds.
2. If your pet shows no reaction, repeat the stimulation level several times before moving up to Low
Stimulation Levels 2, 3, and 4.
3. If your pet shows no reaction to Low Stimulation Levels 1, 2, 3, or 4 move the
Stimulation Range
Switch to Medium ( II ), press the Stimulation 1 button continuously for 1 to 2 seconds.
4. If your pet shows no reaction, repeat the stimulation level several time before moving up to Medium
Stimulation Levels 2, 3, and 4.
5. YOUR PET SHOULD NOT VOCALIZE OR PANIC WHEN RECEIVING STIMULATION. IF THIS
HAPPENS, THE STIMULATION LEVEL IS TOO HIGH AND YOU NEED TO GO BACK TO THE
PREVIOUS LEVEL AND REPEAT THE PROCESS.
6. Move up through the stimulation levels until your pet reliably responds to the stimulation.
7. If you have moved the Stimulation Range
Switch
to High ( III ) and your pet continues to show no
response, check the fit of the Receiver. Then go back to #1 and repeat the process. If this still does not
yield any results, your pet’s hair will need to be trimmed around the Contact Points.
If all of these steps have been done and your pet continues to show no reaction to the stimulation, see the
“Test Light Instructions” section.
If after completing all of these steps your dog still does not indicate he is feeling the stimulation, please
contact Customer Care Center or visit our website at www.petsafe.net.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PDT17-13480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PDT17-13480 in the language / languages: English as an attachment in your email.

The manual is 2.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info