771307
10
Zoom out
Zoom in
Previous page
1/24
Next page
10 Customer Care Center 1-800-732-2677
STEP 3
Fit the Receiver Collar
Important: The proper fit and placement of your Receiver Collar is important for effective operation. The
Contact Points must have direct contact with your dog’s skin on the underside of his neck.
To assure a proper fit, please follow these steps:
1. Make sure that the Receiver Collar is turned off.
2. Start with your dog standing comfortably (3A).
3. Place the Receiver Collar on your dog’s neck close to the ears. Center the
Contact Points underneath your dog’s neck, touching the skin (3B). Note: It is
sometimes necessary to trim the hair around the Contact Points
to make sure that contact is consistent.
Do not shave the pet’s neck as this may increase
the risk of skin irritation.
4. Check the tightness of the Receiver Collar by inserting one
finger between the collar and your dog’s neck (3C). The fit
should be snug but not constricting.
5. Allow your dog to wear the Receiver Collar for several minutes
then recheck the fit. Check the fit again as your dog becomes
more comfortable with the Receiver Collar.
The Receiver Collar should not be worn for more
than 12 hours out of every 24-hour period. Leaving
the collar on too long could lead to skin irritation.
STEP 4
Program the Remote Transmitter
Note: The Handheld Remote is factory set to Mode 2. The Mode of the Handheld Remote can be
changed to fit your type or style of training.
To Change the Mode
1. Referring to the table below, adjust the Intensity Dial to the Mode you want to use.
2. Turn the Handheld Remote over.
3. With a pen or paperclip, depress and release the Mode Button. When the
Mode Button is pressed, the Remote Indicator Light will be solid green. When
released, it will flash the number of times that matches the selected Mode.
For example, if Mode 3 is desired, adjust the Intensity Dial to Level 3. Once the Mode Button has been
depressed, the Remote Indicator Light will be solid green, and once the Mode Button is released, the
Remote Indicator Light will flash three times.
3A
3B
3C
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PDT00-15102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PDT00-15102 in the language / languages: English as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info