771307
6
Zoom out
Zoom in
Previous page
1/24
Next page
6 Customer Care Center 1-800-732-2677
Key Definitions
Handheld Remote: Transmits the radio signal to the Receiver
Collar. It is waterproof. It is factory set to Mode 2.
Transmitter Indicator Light: Indicates that a button is pressed
and also serves as a low-battery indicator.
Green LED: Indicates when a Tone button is pressed. Also
shows when charging is complete.
Red LED: Indicates low battery and when a Continuous
Stimulation Button is pressed. Also shows when the
Handheld Remote is being charged.
Intensity Dial: Provides multiple levels of static stimulation so
you can match the level to your pet’s temperament.
Side Button: This button is factory set to deliver Tone A (low
tone) only.
Upper Button: This button is factory set to deliver Tone B (high
tone) only.
Lower Button: This button is factory set to deliver Continuous
Stimulation set by the Intensity Dial.
Receiver Collar: Receives the radio signal from the Handheld Remote. It
is waterproof.
On/Off Button: Momentarily pressing and holding this button turns the
Receiver Collar on and off.
Contact Points: The contacts through which the Receiver Collar delivers
static stimulation.
Receiver Indicator Light: Indicates when the Receiver Collar has been
turned on or off and also serves as a low-battery indicator.
Green LED: Tone A Indicator.
Red LED: Indicates when Tone B or static stimulation is being
delivered and serves as the low battery indicator.
Charging Jacks: For connecting the charger. Although the Handheld
Remote and Receiver Collar are waterproof without the charger covers, keep
the covers in place when not charging to keep debris out of the openings.
Continuous Stimulation: You control when and how long stimulation
is delivered to your dog through the Receiver Collar’s Contact Points.
When a Continuous Stimulation Button is pressed for 8 seconds or more,
the Handheld Remote will “time-out.” The button will need to be released and pressed again before
additional stimulation can be delivered.
Tone A (Low Tone): Use the Tone A (Side Button) as a marker to reinforce positive behavior. Again,
timing is critical. Praise or treat the dog immediately following Tone A.
Tone B (High Tone): Use Tone B (Upper Button) with a Continuous Stimulation (Lower Button) to stop
unwanted behaviors. Timing is critical. Tone B followed by Continuous Stimulation should occur during
or immediately after the unwanted behavior. Once your dog associates the High Tone with the static
stimulation, you will only need to use Tone B.
Handheld Remote
Indicator
Light
Side Button
Upper Button
Antenna
Intensity Dial
Lower Button
Charging Jack
(with cover)
Receiver Collar
Charging Jack
(with cover)
Receiver Indicator Light
On/Off Button
Contact Points
(Top)
(Bottom)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PDT00-15102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PDT00-15102 in the language / languages: English as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info