771301
8
Zoom out
Zoom in
Previous page
1/25
Next page
8 Customer Care Center 1-800-732-2677
Operating Guide
Step 1
Prepare the Handheld Remote
Charge the Handheld Remote
1. Lift the rubber cover protecting the Handheld Remote
Charging Jack.
2. Connect one of the charger connectors to the Handheld
Remote Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Handheld Remote for 5 hours for the first
charge. Recharges take only 3-4 hours. Note: The Battery
Indicator will scroll while charging and will become solid
when fully charged.
5. When charging is completed, replace the rubber cover.
Note: Approximate battery life between charges is 40 to 60 hours, depending on frequency of use.
Turning ON the Remote
Power up the Remote by pressing any button. You will see the display turn on when you press
any button.
Remote Digital Display
The display stays on for 1 minute after a button is pressed. After 1 minute with no buttons pressed,
the display shuts off and the Remote goes into battery conservation mode. Pressing any button
will cause the display to turn back on. The various display symbols are explained below.
Numeric readout Displays the spray level for Dog 1 or Dog 2.
Dog 1/ Dog 2 The symbol displayed is the active dog receiver
collar. See Two Dog System on page 13.
Tone or Spray When pressing Tone or Spray the Dog 1 or Dog 2
symbol will appear in bold or emphasized.
Tone Only When pressing Tone Only for Dog 1 or Dog 2 the
number zero appears.
Battery Indicator The battery indicator provides constant
awareness of your battery’s power level. See
Battery Indicator for more detailed information.
Note: Factory preset is for Dog 1 mode, you will not see the Dog 2 symbol unless the unit is
programmed for Dog 2 (see Two Dog System on page 13).
Charger
connector
placed in the
Handheld
Remote
Charging Jack
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe PDT00-11234 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe PDT00-11234 in the language / languages: English as an attachment in your email.

The manual is 2.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info