770966
7
Zoom out
Zoom in
Previous page
1/36
Next page
petsafe.com 7
Cut Pet Door Opening
3A Drill ½” (13 mm) holes in inside corners of drawn
template. These will be the pilot holes for the saw blade.
Helpful Tip:
Use both hands to hold drill steady and
straight at a 90° angle.
3B Beginning in one of the holes just drilled, cut along the
drawn template lines. After cutting out the opening, you
may need to recut to square the opening. This is
necessary for the pet door frame to t correctly.
Helpful Tip:
Apply masking or painter’s tape on bottom of
jigsaw and outer edges of drawn template to protect door
nish. Use a le to remove burrs after drilling and cutting
to make cutting and installation easier.
Helpful Tip:
Use proper saw blade length and type according
to door thickness and material (for example a wood blade for a
wood door and a metal blade for a metal door). Cut slowly using
both hands to hold the saw steady and straight at a 90° angle.
This will prevent the blade from cutting unevenly between interior
and exterior sides of the door.
Fit Core Covers
4A Measure the thickest part (T) of your cut-out. Note
this measurement.
4B Cut the grooved side of the plastic core covers to
equal the cut-out thickness (T) of your door + ⅞”
(22 mm).
4C Snap uncut edge (side with one rib) of assembled
core covers inside bottom and side tabs of interior frame
(frame with 2 aps). Core covers may need trimming to
meet at corners.
Optional
Optional: Use duct tape in the
corners of core covers to help secure
in place and to improve weather
resistance. Cut off any excess tape.
Step
3
3B
Step
4
4C
4A
4B
3A
NOTICE
Make sure there is nothing underneath the door where you will
be drilling the holes or cutting out opening.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Petsafe HPA11-10989 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Petsafe HPA11-10989 in the language / languages: English as an attachment in your email.

The manual is 6.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info