EN
Do not use the appliance if the mains cable •
or the mains plug is damaged or defective.
If the mains cable or the mains plug is
damaged or defective, it must be replaced
by the manufacturer or an authorised repair
agent.
Do not pull the mains cable to disconnect •
the mains plug from the mains.
Disconnect the mains plug from the mains •
when the appliance is not in use, before
assembly or disassembly and before cleaning
and maintenance.
Safety instructions for water
boilers
Do not use the appliance outdoors.•
Place the appliance on a stable and flat •
surface.
Place the appliance on a heat-resistant and •
splash-proof surface.
Make sure that there is sufficient space •
around the appliance to allow heat to escape
and provide sufficient ventilation.
Do not cover the appliance.•
Make sure that the appliance does not come •
into contact with flammable material.
Keep the appliance away from heat •
sources.
Only use the appliance with the supplied •
base.
Only switch on the appliance when the •
heating element is fully immersed in water.
Do not move the appliance while it is •
switched on.
Be careful with hot water and steam to •
avoid burns.
Store the appliance in a dry place when not •
in use. Make sure that children do not have
access to stored appliances.
U.K. Wiring instructions
The wires in the mains lead are coloured in
accordance with the following code:
BLUE NEUTRAL
BROWN LIVE
GREEN/YELLOW EARTH
As the colours of the wire in the mains lead of
this appliance may not correspond with the
colour markings identifying the terminals on
your plug, proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter L or coloured red.
The wire which is coloured GREEN/YELLOW
must be connected to the terminal which is
marked with the letter E or
and is coloured
GREEN or GREEN/YELLOW.
Warning! This appliance must be earthed.
Disclaimer
Subject to change; specifications can be
changed without further notice.
