EN
Congratulations!
You have purchased a Petra appliance. Our aim
is to provide quality products with a tasteful
design and at an affordable price. We hope that
you will enjoy this appliance for many years.
Description (fig. A)
Your 243001 Petra milk frother has been
designed for frothing milk and heating milk.
The appliance is suitable for indoor use only.
The appliance is suitable for domestic use only.
The maximum capacity of the milk jar is 240 ml.
The maximum capacity for frothing milk is
115 ml. The maximum capacity for heating milk
is 240 ml.
1. Heating button / Heating indicator
2. Frothing button / Frothing indicator
3. Milk jar
4. Milk level indicator
5. Lid
6. Handgrip
7. Mixing paddle
8. Frothing paddle
Initial use
Clean the appliance. Refer to the section •
"Cleaning and maintenance".
Clean the accessories. Refer to the section •
"Cleaning and maintenance".
Use (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly or disassembly, switch off
the appliance, remove the mains plug from
the wall socket and wait until the appliance
has cooled down.
- Before filling the milk jar, switch off the
appliance and remove the mains plug from
the wall socket.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the appliance without milk in
the milk jar.
- Always make sure that the water level is
between the minimum mark ("MIN") and
the maximum mark ("MAX") on the water
level indicator (fig. A).
- Do not overfill the milk jar. If the milk jar is
overfilled, hot milk may be ejected.
- Do not fill the milk jar with more milk than
required. Only use the amount of milk
required for frothing or heating the milk.
Frothing milk (fig. A)
The appliance can be used for heating and
frothing milk and for frothing milk only.
Before you proceed, we need you to pay
attention to the following notes:
- Do not remove the lid from the milk jar
during the milk frothing process.
Before you proceed, we would like you to
focus your attention on the following notes:
- If you use to appliance for frothing milk,
make sure that the frothing paddle is
inserted in the milk jar.
Heating and frothing milk (fig. A)
Place the appliance on a stable and flat •
surface.
Remove the lid (5) from the milk jar (3).•
Insert the frothing paddle (8) into the milk •
jar (3).
Fill the milk jar (3) with the required •
amount of milk (max. 115 ml).
Place the lid (5) onto the milk jar (3).•
Insert the mains plug into the wall socket.•
Press the heating button (1). The heating •
indicator (1) lights red. The appliance starts
to heat and froth the milk.
To interrupt the process, press the heating •
button (1).
If the process is completed, the appliance •
will switch off automatically. The heating
indicator (1) flashes for 30 seconds, then
goes off.
Remove the mains plug from the wall •
socket.
Remove the lid (5) from the milk jar (3).•
Pour the milk froth into a cup of coffee.•
Note: If you want to use the appliance again,
wait for at least 3 minutes between two
continuous cycles.
