5
Before use
Carefully study the instructions for
use. They contain important informa-
tion as to use, security, maintenance.
Keep it carefully and hand it over to
further users.
Use the appliance only according to
these instructions. Pay attention to
the safety instructions.
Safety instructions
•
Only connect the appliance to
alternating current - with a rated
voltage according to the rating plate
- to a correctly installed earthed
socket. Cord and plug must be dry.
•
Do not pull the power cord over
sharp edges, do not let it hang down
and protect it from heat and oil.
•
Only use an extension cord of
good quality.
•
Do not disconnect the appliance by
pulling at the cord or with wet hands.
•
Do not carry the appliance hanging
at the cord.
•
Do not place the coffemaker or
thermal jug on hot surfaces i.e. on
hot plates or near hot gas flames,
the casing might melt.
•
Do not place the coffeemaker onto
delicate surfaces as water could
damage them.
•
Do not switch on the appliance
without water. Fill the water bowl
with cold water only up to the
upper water level indication. Do not
fill in water as long as the coffee-
maker is switched on or if it is still hot.
Let the coffeemaker cool down for
approx. 5 minutes.
•
Caution:
Scalding danger due to escaping
steam! Do not swivel the filter
during the brewing operation and
do not open the lid.
•
The thermos jug must not be used
for keeping warm milk products
and baby food since the bacteria
could multiply uncontrollably.
•
This appliance is not meant to be
used by persons (including child-
ren) with reduced physical, senso-
rial or mental capacities or in
absence of the necessary experi-
ence and/or knowledge - unless
they are supervised by a person
responsible for their safety and
from whom they get instructions on
how to use the appliance.
•
Keep out of reach from children.
•
Do not put the appliance into
operation resp. pull out plug in case:
- the appliance of power cord are
damaged
- the appliance is not water-tight
- there is a doubt for damage,
after the appliance has fallen
down.
In these cases give it to an After
Sales Service.
•
Disconnect the appliance if it is not
used for longer time.
•
Descaling of the appliance is
necessary in regular intervals.
•
Do not immerse the appliance in
water.
•
No liability is assumed for dama-
ges resulting from misuse, wrong
use or improper repair.
Guarantee is excluded with regard
to the above mentioned cases.
•
The appliance is not intended for
commercial use.
•
In case the cord of this appliance is
damaged, it has to be replaced by
an authorised service agent of the
manufacturer or a person having
similar qualifications. Substantial
dangers for the user can appear
from inappropriate repairs.
Information for the Thermal
Carafe
The thermal carafe contains 10 cups
of coffee at 125 ml each.
It is designed as serving carafe and
keeps the contents warm at maxi-
mum fill. The warming period can be
essentially reduced in case of partial
filling and residual quantities. It is
best, if the carafe is rinsed with hot
water prior to preparation.
The closure of the brewing lid is not
100% leak-proof, so that it can be
easily opened after the coffee has
cooled. Only lightly twist the cover
for closing.
Use the filled carafe only vertically,
do not bump hard and do not tilt.
When pouring, turn the lid counter-
clockwise until the marking is above
the pouring spout.
The double-walled insulating glass
insert is mouth blown. Streaks or
bubbles, which can appear like
cracks, cannot be prevented. They
do not inhibit its usability.
High temperature differences must
be avoided, otherwise the insulating
glass insert could shatter. Do not
use any hard objects for stirring or
cleaning. Do not place any tea filters
into the thermal carafe or fill with ice
cubes.
If the glass is damaged, a risk of
imploding the insert exists due to the
vacuum. This could also occur at a
later time without connecting the
cause of the damage. Therefore
never drink directly from the thermal
carafe, do not reach into the carafe
and do not use any hard brushes
and such!
Always close the carafe with a lid
and do not leave unattended near
children!
Damages on the insulating glass ins-
ert are exempt from the warranty.
Liability is not assumed for subse-
quent damages that occur due to
careless handling.
Replace insulating glass insert
You may obtain a replacement for
the insulating glass insert where you
bought the appliance or you can
order it directly from petra-electric.
Please state the precise model de-
scription. You will find it on the bot-
tom of the appliance.
Please wear safety glasses and
safety gloves when replacing the
insulating glass insert and make
sure that no other person is in the
vicinity.
Unscrew the bottom of the thermal
carafe by turning it counterclockwise
and remove the glass insert. Place
the rubber seal on the edge of the
new insulation glass insert, and then
push the insert into the housing and
screw onto the bottom by turning
clockwise. The dowel of the glass
GB
Instructions for use
