To restore the coffee quantity to the factory •
settings, press the on/off button (1) to
switch off the appliance.
Keep both start/stop buttons (2/3) pressed •
simultaneously for 3-4 seconds until all
indicators light briefly.
Emergency opening for coffee pad
cassette (fig. A & D)
If the locking collar (7) cannot be set to another
position after the appliance has cooled down,
the coffee pad cassette (11) must be removed
according to the following procedure:
Insert a straightened paper clip horizontally •
into the opening (16) directly next to
coffee pad cassette (11) and slightly press
the paper clip into the opening.
Boiling water (fig. A - C)
Warning!
- Before assembly or disassembly, switch off
the appliance and remove the mains plug
from the wall socket.
- Do not use the appliance for boiling water
with coffee pads in the coffee pad cassette.
Fill the water reservoir (12) with water up •
to the maximum mark ("MAX") on the
water level indicator (13).
Place the water reservoir (12) into the •
appliance.
Set the locking collar (7) to position 'C'.•
Make sure that the coffee pad cassette •
(11) is empty and inserted in the appliance.
Set the locking collar (7) to position 'D'.•
Place the required amount of cups under •
the coffee dispenser (8).
- For one cup, place the cup under both
dispenser nozzles of the coffee dispenser.
- For two cups, place one cup under the
left dispenser nozzle and one cup under
the right dispenser nozzle of the coffee
dispenser.
Press the on/off button (1) to switch on •
the appliance. The ready-to-brew indicator
(5) lights red. The appliance starts heating.
If the process is completed, the ready-to-
brew indicator (5) lights green.
Take one of the following actions:•
- For one cup, press the start/stop button
(2). The appliance starts pouring water.
To interrupt the process, press the start/
stop button (2) again.
- For two cups, press the start/stop button
(3). The appliance starts pouring water.
To interrupt the process, press the start/
stop button (3) again.
If the process is completed, set the locking •
collar (7) to position 'B'.
Press the on/off button (1) to switch off •
the appliance.
Allow the appliance to cool down completely.•
Energy-saving functions
Economic brewing function
If you want to switch off the appliance after
one brewing cycle, the economic brewing
function can be activated automatically. To
activate the economic brewing function, press
the on/off button (1) until the ready-to-brew
indicator (5) lights green, then keep the on/off
button (1) and both start/stop buttons (2/3)
pressed simultaneously. The ready-to-brew
indicator (5) flashes red to indicate that the
appliance will switch off automatically.
Stand-by mode
If the appliance is not used for more than
approximately 5 minutes, the stand-by mode is
activated automatically. The ready-to-brew
indicator (5) flashes red. To activate the appliance
for use, press the start/stop button (2/3) again.
Automatic switch-off function
The appliance switches off automatically if it is
has not been used for a period of 30 minutes.