Manual PerfectPro WS2BT - WORKSTATION 2 (page 6 of 50) (English, German, Dutch, French)

742528

Zoom out

Zoom in

1/50

7 8

USING THE RADIO FOR THE FIRST TIME

1. Placetheradioonaatsurface.

2. Carefully extend the antenna located on the top of the radio. Adjust the antenna so

it is vertically extending above the radio.

3. Plug the AC power cord into the AC socket. The radio will start up and the display

will show “WELCOME TO DIGITAL RADIO” for a few seconds. Then the radio will

automatically perform an auto scan of the Band III DAB channels and the FM band.

The display will show “Scanning” in DAB and “Auto” in FM.

4. When the scan is completed, the 10 strongest FM stations will be stored as presets

and the available DAB stations will be in the list of stations. The radio will switch to

standby with the updated clock and date showing on the display.

5. If no signals are found, the clock will not be updated. It may be necessary to

relocate the radio to a position with better reception.

DAB MODE (DAB/DAB+)

Operating the radio – DAB

1. Carefully extend the antenna. Press the On/Off button to switch on the radio.

2. Select the DAB waveband by pressing the Source button.

3. Therststationinthelistofstationsfoundwillbeplayed.Thedisplaywillshow

the station name. If the radio has been used before, the last used station will be

selected.

4. If no DAB signals are detected, “No stations available” will be displayed. It may be

necessary to relocate the radio to a position with better reception. You should

 thencarryoutanautoscantondstations,pleaserefertothesection“Find new

stations - DAB”.

Selecting a station – DAB

1. Press the On/Off button to switch on the radio.

2. Select the DAB waveband by pressing the Source button.

3. The display will show “Now tuning” for a few seconds.

4. The display shows the name of the radio station currently selected.

5. Rotate the Tuning knob to scroll through the list of available stations.

6. When the desired station name appears on the display, press the Tuning knob

to select the station.

Note: If after selecting a station the display shows “No stations available”, it may be

necessary to relocate the radio to a position with better reception.

Secondary services – DAB

1. Certain radio stations have one or more secondary services associated with them.

If a station has a secondary service associated with it, then the secondary service

will appear immediately after the primary service as you turn the Tuning knob.

2. Press the Tuning knob to select the secondary service.

Most of secondary services do not broadcast continually and if the selected service

is not available, the radio will re-tune to the associated primary service.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro WS2BT - WORKSTATION 2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

PerfectPro WS2BT - WORKSTATION 2 Manual

Product: