742409

PerfectPro UB500R - UBox 500R Manual

21
Zoom out
Zoom in
Previous page
1/191
Next page
19
If you do not wish to prune stations, select “No” and then
press and release the Tuning control knob to conrm the
setting.
NOTE
If you have moved your radio to a different part of the country you should also carry out a
search for new stations (please see the section 'Finding new stations').
Prune stations
Operating your radio – FM
1. Straighten the antenna. Press the Power On / Off button to switch on your radio.
2. Press the Source button to select FM waveband.
3. T
o scan up in frequency, first rotate the Tuning control knob in a clockwise direction and then
press the Auto tune button. Your radio will scan in an upwards direction (low frequency to high
frequency) and stop automatically when it finds a station of sufficient strength. To scan down in
frequency, first rotate the Tuning control knob in a anti-clockwise direction and then press the
Auto tune button. Your radio will scan in a downwards direction and stop automatically when it
finds a station of sufficient strength. After a few seconds the display will update. The display will
show the frequency of the signal found. If the signal is strong enough and there is RDS data
present then the radio will display the station name.
4. When the waveband end is reached, your radio will recommence tuning from the opposite
waveband end.
5. Adjust the Volume control to the required setting.
6. To switch off your radio, press the Power On / Off button.
Manual tuning – FM
1.
Press the Power On / Off button to switch on your radio.
2.
Press the Source button to select FM waveband.
3.
Rotate the Tuning control knob to tune to a station. The frequency will change in steps of 50 kHz.
When the waveband end is reached, the radio will recommence tuning from the opposite waveband end.
4.
Adjust the Volume control to the required setting. To switch off your radio, press the Power On /
Off button.
3
Prune?
Yes <No>
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro UB500R - UBox 500R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro UB500R - UBox 500R in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info