742542

PerfectPro ROCKMATE 2 Manual

10
Zoom out
Zoom in
Previous page
1/57
Next page
9
Using the radio for the rst time
1. Place your radio on a at surface.
2. Please press the Standby button to switch on your radio. It may be necessary to relocate your
radio to a position giving better reception. You should then carry out a scan to nd stations in FM.
Setting the clock time
1. Press and hold the Tuning knob until the hour digits of the clock time begins ashing. Rotate
the Tuning knob to choose the hour digit as needed.
2. Press and release the Tuning knob to save the hour setting, and the minute digits on the display
will ash. Rotate the Tuning knob to choose the minute digits as needed.
3. Press and release the Tuning knob to save the minute setting and complete the clock setting.
The radio will save your setting. The radio will display saved time after clock time setting is
completed.
Note: The clock time setting can be done at power Off or On status.
You can also set the clock time with the FM RDS. This can automatically set the time (CT) Press
the source to FM radio, select a FM radio station which provides RDS CT service, the clock will
be aligned in 2 minutes once the CT service is available. Once the FM radio station has been
changed to one with RDS CT service, the clock time will be aligned again.
Operating your radio – Manual tuning FM
1. Press the STANDBY button to switch on your radio.
2. Press the SOURCE button to select FM band and stand up the rubber antenna properly to get
best FM reception.
3. Rotate the Tuning/Seek knob to tune required frequency in the increment of 100 kHz.
4. Select required loudness setting and stereo / mono mode for obtaining a best sounding quality.
5. A stereo symbol will appear on the LCD display if a stereo broadcasting station is found.
6. Rotate the Volume control knob to get required sound level.
7. To turn off the radio, press the STANDBY button. Display will show local time only.
2
1,7
6
3
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro ROCKMATE 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro ROCKMATE 2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info