742515

PerfectPro AB1 - Audisse Manual

16
Zoom out
Zoom in
Previous page
1/82
Next page
ANSWERING INCOMING PHONE CALL
The Hands Free Calling feature allows you to answer an incoming phone call when the
sound system has been connecting to a Bluetooth mobile phone.
Press the Tuning/Seek/Select control (Phone icon) on the right to pick up an incoming
call.
Speak towards the microphone (MIC) located bottom side of the radio.
Adjust the conversation volume by rotating the Volume control. A lower volume setting
can reduce a possible echo in the phone conversation.
Press the Tuning/Seek/Select control again to hang up the phone call.
Note: The volume of ring tone will be increased to maximum after the phone rings for
about 10 seconds.
Note: The ringtone of iPhone will be streamed to the radio via Bluetooth. But because of
Android system, the ringtone of Android phone or other phones will only be sounded on
the mobile.
AUX INPUT
WARNING: Never use the AUX-IN socket in rainy or moist conditions to prevent
moist from entering the radio. Keep the rubber cover well closed under these
conditions.
A 3.5mm Auxiliary Input socket located on the rear of Perfectpro Audisse is provided
for connecting the audio signal from an external audio source such as an MP3 or CD
player.
Connect a stereo lead from the headphone output of your MP3 or CD player to the Aux
In socket located at the rear of the sound system. Typically this lead will have a 3.5mm
stereo plug at both ends.
Switch on Perfectpro Audisse by pressing the Power button briey.
Press the Source button until AUX in mode is shown on the display.
Press the 'play' on the connected audio device. If you are using its headphone output for
the connection, set its volume control to a level of somewhere between two-thirds and
maximum (the objective is to get a strong audio signal but without too much distortion).
Then adjust the volume on the sound system as required. Note, if using an iPod as the
sound source, you may need to set its output to maximum to get an adequate audio
signal level.
After use, disconnect your player in order to listen to Perfectpro Audisse conventionally.
EQUALIZER FUNCTION
The sound on Perfectpro Audisse can be adjusted to suit your personal taste for the
material that you are listening to. The Perfectpro Audisse has a range of equaliser
modes. Alternatively you may set the treble and bass levels to your own preferences
which can be accessed from the My EQ menu item.
Press the Power button to switch on your radio. Access the menu for the current mode
by pressing the Menu button.
Rotate the Tuning/Seek/Select control until 'System settings' is highlighted on the
display. Press the control to enter the system settings menu.
GB
29 30
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for PerfectPro AB1 - Audisse at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of PerfectPro AB1 - Audisse in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info