545394
4
Zoom out
Zoom in
Previous page
1/17
Next page
SCAMSETW1 PEREL
4
3. Description of the Monitor
1. Volume + / -
2. Alarm volume
3. Power
4. +
5. Menu
6. -
POWER – Press to turn the monitor ON or OFF.
ALARM VOLUME – Turn to adjust the alarm volume of the monitor.
VOLUME – Adjust the sound level by pressing + or -.
+ / MENU / – - LED on: adjust brightness + or -; LED flashing: adjust colour + or -; LED off: adjust contrast + or -
4. Operating the System
a. Scan
Press the SCAN button. The monitor places itself in standby mode and scans the active cameras. If a camera
detects motion, the monitor will display the camera picture and the beeper will emit a sound. The monitor will return
to the standby mode and scan the cameras 2 minutes after the last motion detection. Press MANUAL or AUTO to
cancel this mode.
b. Auto
Press this button to enable the monitor to automatically scan the active cameras. When a camera detects motion, the
monitor will display the picture for a few seconds and emit a sound. Only set the DIP switches in the down position
corresponding to the active cameras to avoid selecting an inactive channel. The dwell time is preset to 4 seconds but
can be adjusted between 2 ~ 30 seconds. To do so, hold the AUTO and MANUAL buttons simultaneously pressed.
Each flash of the LED will increase the dwell time by a second.
c. Manual
Select a specific camera by pressing the MANUAL button. Each press will switch to the next camera. When a
camera detects motion, the monitor will display the picture for a few seconds and emit a sound. Only set the DIP
switches in the down position corresponding to the active cameras to avoid selecting an inactive channel.
5. Troubleshooting
Problem Solution
No camera picture 1. Check all connectors. Make sure the cameras and monitor are switched on.
2. Make sure the cameras and the monitor are set to the correct channel.
3. Make sure not to exceed the transmitting range.
4. Make sure the rechargeable battery pack is fully charged.
Blank monitor 1. Make sure the monitor is switched on.
2. Plug the AC adapter correctly into the mains or power input jack.
3. Make sure the rechargeable battery pack is fully charged.
Interference 1. Make sure not to exceed the transmitting range and to remove all obstructing objects.
2. Try repositioning the camera and/or monitor to improve the reception quality.
3. Remove all other devices using the 2.4GHz transmission frequency.
4. Make sure the rechargeable battery pack is fully charged.
Audio problems 1. Turn up the volume.
2. Make sure the sound is produced within the microphone’s range.
3. Try moving the monitor away from the camera in case of feedback.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel SCAMSETW1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel SCAMSETW1 in the language / languages: German as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info