622109

Perel PHG2 Manual

3
Zoom out
Zoom in
Previous page
1/39
Next page
PHG2
V. 01 – 16/05/2014 3 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorit ies.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
2.1 Definition of terms
statement including non-hazardous information
indicates a potentially hazardous situation which if not avoided could result in minor or
moderate injury and/or property damage. It also indicates unsafe practices.
indicates a potentially hazardous situation which if not avoided could result in moderate
or serious injury and/or property damage. It also indicates unsafe practices.
indicates an imminent hazard which if not avoided will result in severe injury or even
death and/or lead to major loss of property.
2.2 Safety Instructions
DANGER: toxic hazard
Be extremely careful when stripping paint. Paints and thus paint waste may
contain lead, which is poisonous. This is almost certain the case for paint
manufactured before 1977. Hand to mouth contact with lead based paint or
waste can result in the ingestion of lead. Exposure to even low levels of lead
can cause irreversible brain and nervous system damage; young and unborn
children are particularly vulnerable.
Before beginning any paint removal process you should determine whether
the paint you are removing contains lead. When in doubt, have the paint
analysed by a professional.
LEAD BASED PAINT SHOULD NOT BE REMOVED USING A HEAT GUN.
ONLY A PROFESSIONAL SHOULD HANDLE THESE PAINTS AND
RESIDUES.
DANGER: fire hazard
Hidden areas e.g. behind walls, ceilings, floors, soffit boards and other panels
may contain inflammable materials that could be ignited by the heat gun. The
ignition of these materials may not be readily apparent and could result in
property damage and injury to persons. Check the work area before using the
heat gun.
Keep the heat gun in motion during use to avoid local overheating resulting in
damage or the work piece catching fire.
Never leave a working heat gun unattended.
Note that the heat gun has a thermal relay installed to prevent overheating.
Always switch the heat gun off and unplug it from the mains when this
thermal relay is activated, as deactivation of the thermal relay will resume
normal heating operation.
Never cover the air outlet or intake.
Keep a fire extinguisher at hand at all times.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel PHG2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel PHG2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info