720263
7
Zoom out
Zoom in
Previous page
1/42
Next page
FT10C/FR - FT15C/FR - FT30C/FR
V. 03 11/09/2017 7 ©Velleman nv
14. Troubleshooting
cause
solution
Faulty power cable.
Replace or repair.
Faulty motor.
Replace or repair.
Faulty switch.
Replace or repair.
There is no spark.
Adjust the distance between the
electrode and the burner or
replace the burner.
Low gas level.
Replace the gas cylinder.
Faulty gas valve.
Replace or repair.
Closed security valve.
Press the button to activate the
security valve.
Disordered thermocouple.
Adjust the thermocouple according
to the burner.
The valve has been insufficiently
activated.
Repeat the switch-on procedure.
Faulty thermocouple or valve.
Replace or repair.
Overheated device.
Leave the heater to cool down for
5 minutes before switching on.
Insufficient gas feeding volume.
Replace the gas cylinder.
The device is overheating.
Insufficient airflow toward the
heater. Ventilate the room in
which the heater is being used.
Faulty air feeding at the burner.
Free the airflow toward the heater
or ventilate the room in which the
heater is being used.
Excessive gas flow toward the
burner.
Check the pressure and/or replace
the pressure regulator on the gas
cylinder.
15. Technical Specifications
power
FT10C/FR .......................................................................................................... 10 kW
FT15C/FR .......................................................................................................... 15 kW
FT30C/FR .......................................................................................................... 30 kW
air flow
FT10C/FR ......................................................................................................320 m³/h
FT15C/FR ......................................................................................................320 m³/h
FT30C/FR ......................................................................................................650 m³/h
gas pressure ..................................................................................................... 700 mbar
power supply .............................................................................................. 230 V~, 50 Hz
gas type ............................................................................................. butane and propane
included ............................................................................................... hose and regulator
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.perel.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel FT10C-FR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel FT10C-FR in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info