Manual Perel FT10C-FR (page 4 of 42) (English, German, Dutch, French, Polish, Portuguese, Spanish)

720263

Zoom out

Zoom in

1/42

FT10C/FR - FT15C/FR - FT30C/FR

V. 03 – 11/09/2017 4 ©Velleman nv

 Do not hamper, completely or partially, the air intake at the back and/or the air output at the front. Avoid

using any type of air canalization toward or from the device.

 The minimum safety distance is 2 m from walls or any other object.

 The mobile heater may only be used on a fireproof surface.

 Connect the mobile heater on a levelled, stable and fireproof surface to avoid fire risks.

 The mobile heater may not be used in rooms where explosive dusts, gases, liquids or any other flammable

materials are present (fabrics, wood, paper, petrol, etc.).

 It is recommended to use a fireproof protection if the mobile heater is being used near steps, curtains or

other covering materials. A minimum safety distance of 2.5 m between the hot parts of the device and any

flammable material (fabrics, wood, paper, petrol, etc.) or from thermolabile materials (included the power

cable) must be observed.

 Maintenance and internal cleaning activities may only be commended to a specialised technician appointed

by the manufacturer.

 The heater must be disconnected from the mains and from any gas-feeding device if the heater is to be left

unattended and if the safety instructions cannot be observed.

 If the heater does not switch on or if it switches on in an abnormal way, disconnect the heater from the

mains and from any gas-feeding device. Check the airflow to the heater and make sure it is sufficient

before trying to switch on the heater.

 Never move, manipulate or clean a switched-on heater.

 Only replace the gas hose with a similar hose or with a hose, which is able to cope with the used gas

pressure. Refer to the local regulations. The used gas hose must be 1.5 m long. Do not crimp or bend the

gas hose.

 Do not use a gas hose to canalize hot air.

 Disconnect the heater from the mains, cut the gas supply, disconnect the gas hose and close the gas intake

inside the heater if it will not be used for a longer period.

 It is recommended to leave the annual maintenance of the heater to a specialized technician.

3. Warning

Asphyxiation hazard.

 Do not use in unventilated areas. Lack of proper ventilation will lead to improper combustion. Improper

combustion can lead to carbon monoxide poisoning and serious injury or death. Symptoms of carbon

monoxide poisoning can include headache, dizziness and difficulty in breathing.

 Never obstruct the front and back of the heater.

GAS ODOUR. Gas has odorants added specifically for gas leak detection. If a gas leak occurs, you

should be able to smell gas. Since LP gases are heavier than air, you should smell for the gas odour

low to the floor. Any gas odour is your signal to go into immediate action.

 Do not take any action that could ignite the fuel gas. Do not operate any electrical switches. Do not pull any

power supply or extension cords. Do not light matches or any other source of flame. Do not use your

telephone.

 Get everyone out of the building and away from the area immediately.

 Close all gas tank or cylinder supply valves, or the main supply valve located at the meter if you use natural

gas.

 Leave the area or building and call your gas supplier and the fire department. Stay out of the area or the

building until it is declared safe by the gas supplier and the fire department.

 Let the gas supplier and the fire department check for the gas leak.

4. General Guidelines

Refer to the Velleman

Service and Quality Warranty on the last pages of this manual.

5. Connecting and Replacing the Gas Cylinder

Only replace the gas cylinder in the open air, far from any open flame or heat source.

Connect the gas cylinder using following accessories:

 1 flexible hose for liquid gas (incl.)

 1 pressure regulator for liquid gas (incl.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Perel FT10C-FR in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Perel FT10C-FR Manual

Product: