622426
4
Zoom out
Zoom in
Previous page
1/80
Next page
EVM892
29.04.2010 ©Velleman nv
4
Continuity
/ ON/OFF
3. Warnings and safety instructions
Read this manual thoroughly. Familiarise yourself with the functions
of the device before actually using it.
Only use the device for its intended purpose. Using the device in an
unauthorized way will void the warranty. Damage caused by
disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any
ensuin
g
defects or
p
roblems.
WARNING:
T
o avoid electrical shock always disconnect the test
leads prior to opening the housing. To prevent fire hazards, install
fuses with the same specifications as shown.
Remark: refer to the warnin
g
on the back of the mete
r
Keep the device away from children and unauthorised users.
Protect this device from shocks and abuse. Avoid brute force when
operating.
Avoid cold, heat and large temperature fluctuations. When the unit is
moved from a cold to a warm location, leave it switched off until it
has reached room temperature. This to avoid condensation and
measurin
g
errors.
This is an installation category CAT II 600V measuring
instrument. Never use this equipment in a higher category than
indicated. Refer to §4 Overvolta
g
e /installation cate
g
or
y
.
Pollution degree 2-device. For indoor use only. Keep this device
away from rain, moisture, splashing and dripping liquids. Not for
industrial use. Refer to §5 Pollution de
g
ree.
Before each use, make sure the test probes are in good condition.
Always place your fingers behind the protective edges of the test
probes while measuring! Never touch free terminals when the
meter is connected to a circuit.
Make sure the meter is in the appropriate measuring range before
connecting it to a test circuit.
Risk of electric shock during operation. Be very careful when
measuring live circuits. Use extreme caution when measuring
volta
g
es hi
g
her than 60Vdc or 30Vac rms.
Do not measure circuits that may contain voltages > 600V
Do not measure current in circuits with voltages > 250V
Do not conduct resistance, diode- or continuity measurements on
live circuits. For transistor tests, use the included transistor socket.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel EVM892 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel EVM892 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info