Manual Perel ELSDIN (page 6 of 38) (English, German, Dutch, French, Portuguese, Spanish)

622619

Zoom out

Zoom in

1/38

ELSDIN

V. 02 – 20/11/2015 6 ©Velleman nv

4. Features

 automatically turns light on or off according to ambient light

 DIN rail version

5. Installation

1. Slide the module over the DIN rail. Push the plastic tab upward

to lock the module onto the rail. Push the plastic tab completely

upward to fix the module onto the rail (fig. 1).

2. Install the sensor. Loosen the four screws and open the housing

(fig. 2). Fix the sensor using nylon plugs [a] and screws [b]

(fig. 3). Close the housing with the front plate [c] (fig. 4).

3. Proceed with the connection.

Install the sensor away from artificial light sources. There

should be no object affecting the natural light. Do not install

the sensor directly under a lamp. Refer to figure 5.

6. Connection

Refer to the illustrations on page 2 of this manual.

Risk of electroshock! Touching live wires can cause life-

threatening electroshocks. Make sure to switch off the

power first!

7. Test

It is recommended to test the sensor in the dark.

1. Turn the LUX knob completely in an anti-clockwise direction.

2. Switch on the power.

3. Turn the LUX knob in a clockwise direction until the lamp

switches on.

8. Cleaning and Maintenance

The sensor does not need any particular maintenance. However, it is

advisable to clean it occasionally to keep it looking like new.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Perel ELSDIN in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Perel ELSDIN Manual

Product: