720371
33
Zoom out
Zoom in
Previous page
1/42
Next page
EDKP1/EDKM1
V. 04 17/07/2019 8 ©Velleman nv
CAUTION:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
Do not puncture batteries or throw them in fire as they
may explode. Do not attempt to recharge non-rechargeable
batteries (alkaline). Dispose of batteries in accordance with
local regulations. Keep batteries away from children.
5. Installation
Test the operating range between the receiver and the
transmitter. The operating range is 150 m in the open air,
but may be less due to walls and other obstructions such
as PVC or metal frames.
Refer to the illustrations on page 2 of this manual.
Transmitter
1. Carefully open the housing of the transmitter and use the back
plate as a template. Mark the drilling holes at the required
height.
2. Drill the holes using a drill and the appropriate drill bit (not
included).
3. Insert a nylon plug (included) into each hole.
4. Fix the back plate with the included screws. Click the front plate
onto the back plate.
5. Apply a name tag [1] if desired.
Remark: You can also fix the transmitter using double-sided tape.
Receiver EDKM1
1. Choose the installation spot for the receiver.
2. The receiver can be fixed to a wall using a hook or nail [6].
Receiver EDKP1
Plug the receiver into the mains.
EDKP1/EDKM1
V. 04 17/07/2019 9 ©Velleman nv
6. Operation
Refer to the illustrations on page 2 of this manual.
1. Make sure both the receiver and transmitter are powered.
2. The receiver will ring when the button on the transmitter [2] is
pressed.
3. Select the melody with the melody selector [5] and adjust the
volume with volume control button [4].
7. Pairing
1. On the receiver, hold the button pressed for 5 seconds until you
hear a “ding-dong” sound.
2. Now, press the transmitter button. The transmitter emits a
“ding” sound to confirm successful pairing. The receiver emits a
“ding-dong” sound when it exits the pairing mode.
8. Technical Specifications
wireless ................................................................ yes
operating range .............................. 150 m in open area
self-learning .......................................................... yes
bell push.......................................................... kinetic
number of sounds ................................................... 32
IP rating (transmitter) .......................................... IP44
power supply receiver
EDKP1 ........................................ standard Euro plug
EDKM1 ................................. 3 x 1.5 V AA (not incl.)
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.perel.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
EDKP1/EDKM1
V. 04 17/07/2019 33 ©Velleman nv
ATENÇÃO:
Risco de explosão caso a bateria seja substituída de forma
incorreta. Este deve ser substituída apenas por outra igual
ou equivalente.
As baterias (pack de baterias ou baterias instaladas) não
devem ser expostas a calor excessivo como o do sol, fogo
ou similar.
Nunca perfure as baterias nem as deite no fogo, pois
podem explodir. Não tente recarregar baterias não
recarregáveis (alcalinas). Descarte as baterias de acordo
com as regulamentações locais. Mantenha as baterias fora
do alcance das crianças.
5. Instalação
Teste a amplitude de funcionamento entre o receptor e o
transmissor. A amplitude de funcionamento é de 150 m em
espaço aberto, mas poderá ser inferior devido a paredes ou
outras obstruções como estruturas metálicas ou em PVC.
Veja as imagens na página 2 deste manual.
Transmissor
1. Abra cuidadosamente o invólucro do transmissor e use a placa
traseira como modelo para a furação. Marque os furos para
instalação à altura requerida.
2. Faça os furos usando um berbequim e a broca adequada (não
incluído).
3. Coloque uma bucha de nylon (incluídas) em cada um dos furos.
4. Fixe a placa usando os parafusos incluídos. Encaixe a placa
frontal na placa traseira.
5. Coloque uma etiqueta com o nome [1] se desejar.
Observação: Também pode fixar o transmissor usando fita adesiva
de dupla face.
Receptor EDKM1
1. Escolha o local de instalação para o recetor.
2. O recetor pode ser fixado numa parede usando um suporte ou
um prego [6].
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel EDKM1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel EDKM1 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info