622411
6
Zoom out
Zoom in
Previous page
1/44
Next page
EDB8
V. 01 21/12/2015 6 ©Velleman nv
7.3 Receiver
1. Drill two holes with a diameter of 6 mm (distance 56 mm) at the
required height. Insert a nylon plug into each hole.
2. Insert a screw into each hole. Do not fully insert them but leave
about 5 mm free.
3. Hang the receiver onto the screws.
8. Operation
1. Press the auto-learning button on the back of the receiver.
2. Press the push button on the transmitter once. The receiver will
sound to indicate that the new operation code has been
registered.
3. Operate in the same way to memorize an extra transmitter.
4. Press the melody button to select one of the 36 melody. Press
the volume button to select the high, medium or low ring
volume.
Remark
If the receiver sounds for no reason during the learning procedure,
the signal may be subject to interference. Reset the code as
described above.
9. Cleaning and Maintenance
This device does not need any particular maintenance. Occasionally
wipe it with a damp cloth. Do not use harsh chemicals, cleaning
solvents or strong detergents.
10. Technical Specifications
operating distance........................... ± 100 m (in open field)
frequency....................................................... 433.92 MHz
ringing volume ............................... > 80 dB (within 0.5 m)
reception sensitivity .......................................... 80 dBm
transmitting power ............................................. 10 mW
transmitting current ............................................ < 15 mA
quiescent current (transmitter) ................................ < 5 µA
quiescent current (receiver) ................................ < 200 µA
digital code .................................................. auto-learning
modulation type ......................................................... ASK
dimensions
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Perel EDB8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Perel EDB8 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info